Overview
The AMITTARI TG-104-1N.m Handheld Torque Gauge is a High Accuracy measurement tool for a variety of torque unit measurements. The device features a digital display, supports peak hold function, and can be powered by alkaline batteries or external power supplies. Operating temperature range is 0~ 40 ° C. Suitable for industrial environments without sources and corrosion media.
Features
1. High Accuracy and high resolution.
2. Numbers show, ignoring the difference.
3. A variety of measurement units are available for selection and conversion.
4. Peak hold function, keep peak display until manually cleared.
5. Can use alkaline battery power supply; can also be external power supply.
Principle
The torque meter detects the applied torque through the Sensor, converts the physical signal into a digital signal, and displays the peak or instantaneous value on the LCD screen. When the load exceeds 110% F.S., the device will emit a beep alarm to ensure safe use.
Applications
Industrial manufacturing, mechanical assembly, mass inspection, equipment maintenance
Standards
Level 0.5 Precision Standard
Steps
1. Install the battery or connect an external power supply.
2. Select the required torque unit.
3. Apply torque for measurement.
4. When using the peak hold function, manually clear to reset the display.
5. After the measurement is completed, manually shut down or wait 10 minutes for automatic shutdown.
Notice
• The working environment should be free of source and corrosion medium.
• Operating humidity should be less than 80%.
• The allowable load does not exceed 150% F.S., and there will be a beep alarm when it exceeds 110% F.S.
• Power supply voltage is 2 AA batteries or 5V DC before use.
• Avoid use outside the 0~ 40 ℃ Temperature range.
