Overview
The DAQTECH DT-8K Furnace temperature tracker is an 8-channel on-line temperature measurement device designed for wave soldering and reflow soldering processes. The instrument measures temperature from 0 to 500 ° C, and the Sampling rate can be adjusted from 0.05s/channel to 5s/channel. It uses a high-Sensitivity K-type Thermocouple and has a large storage capacity (3.90 million data points). It can continuously record unlimited sets of temperature Linear dispersion data and perform data analysis with software to evaluate temperature Linear dispersion and production processes.
Features
1. Simple and convenient operation, one-click operation.
2. Adopt a user-friendly interface with powerful software analysis capabilities.
3. Data transmission via USB 2.0 and charging of the instrument via USB.
4. With large-capacity storage, 3.90 million data points can be recorded, and unlimited groups of Linear dispersion data can be stored continuously.
5. Low-power design, automatically switches power-saving mode in standby state, and can be continuously tested for 5 hours.
Principle
The Furnace temperature tracker senses temperature changes through the K-type Thermocouple Probe, collects temperature data for each channel at a set Sampling rate (0.05s/channel to 5s/channel), and stores the Data in the built-in memory. After the acquisition is completed, the data is transferred to the computer through the USB interface, and the temperature Linear dispersion is analyzed using the supporting software to evaluate the process status of the welding furnace.
Applications
Considerations of Mounting and Plug-in PCB Welding Process in Electronics Manufacturers, Temperature Measurement of Reflow Soldering, Wave Soldering, Tunnel Furnace and Miscellaneous Ovens
Standards
The information does not mention
Steps
The information does not mention
Notice
When the internal temperature of the instrument exceeds 80 ° C, it will automatically stop working.
The insulation box has a limited tolerance time at different temperatures. Please refer to the insulation box parameters (e.g., about 5 minutes at 300 ° C).
