Overview
XYM-RF (100) heating plate is a flat heating die used by JFL brand with YP-15T small Benchtop manual Powder Tablet Press. It is made of heat-resistant alloy tool steel and is heated by an intelligent digital temperature controller. The instrument is easy to adjust, easy to operate, and the mass is reliable and stable. It is an essential supporting non-standard equipment for laboratories in scientific colleges and research institutes. After the powder or particles are heated under pressure, the Density increases uniformly, the gas content decreases, the coalescence force is strengthened, and the formed body is not easy to crush, which is conducive to analysis, cutting, sintering and preservation.
Features
1. Made of heat-resistant alloy tool steel, the mold hardness is high (HRC > 60).
2. Provide two options: standard (long-term use temperature ≤ 300 ° C, do not exceed 350 ° C) and high temperature (up to 600 ° C).
3. The heating is controlled by the intelligent digital temperature controller, the minimum temperature indication is 1 ℃, and the temperature control accuracy is high.
4. Simple operation, easy adjustment, reliable and stable mass.
Designed for use with YP-15T Benchtop Manual Powder Tablet Press.
Principle
The heating plate controls the conversion of electric energy into heat energy through an intelligent digital display temperature controller, and precisely heats the plate mold made of heat-resistant alloy tool steel. The powder or granular sample is placed in the heated plate mold, and pressure is applied through the matching manual tablet press. Under the combined action of heat and pressure, the sample is pressed into shape, and its internal Density becomes uniform and increased, the gas content decreases, and the intermolecular coalescence force increases, thus forming a dense structure and not easy to crush.
Applications
Scientific research experiments in the fields of chemical industry, superconductivity, Pottery and porcelain, building materials, etc
Steps
1. Install the heating plate correctly with the YP-15T Manual Powder Tablet Press.
2. Connect the power supply (working voltage 220V) and turn on the intelligent digital temperature controller.
3. According to the experimental requirements (standard or high temperature) and sample characteristics, set the appropriate operating temperature on the temperature controller.
4. Wait for the heating plate to heat up to the set temperature and maintain stability.
5. Place the powder or granular sample to be treated into a heated flat mold.
6. Operate the manual tablet press to apply pressure to the sample for compression molding.
7. After molding, the sample is removed for subsequent analysis, cutting, sintering, or preservation.
Notice
The temperature of the standard model should be ≤ 300 ° C for long-term use, and should not exceed 350 ° C.
* Please match the corresponding heating power (800-2000W) according to the mold specifications.
* The thermostat should work in an environment with 0~ 50 ° C, relative humidity 35%~ 85% RH, no corrosion and no strong electromagnetic field radiation.
Please pay attention to high temperature during operation to avoid burns.
* Power frequency is 220V and properly grounded.
Please read the relevant equipment instructions carefully before use to ensure correct installation and operation.
