Overview
The TL-300 Digital Force Gauge is a general-purpose Portable push-pull load testing instrument launched by HBO, suitable for push-pull load testing, insertion force testing and failure testing of various products, and can be combined with various machines and fixtures to form a small testing machine for different purposes.
Features
1. Light weight, small size, wider application scenarios
2. LCD display, white backlight, convenient reading
3.5 Units: N, KN, Kgf, lbf, tf are converted to each other
4. Real-time tracking mode, peak hold mode can be switched freely
5. Free setting of upper and lower limits, automatic sound and light alarm
6. Peak hold time can be set (can be set from 0 to 99 seconds)
7. Gravity acceleration value can be set
8. Free setting of automatic shutdown time without operation (0-99 minutes)
9. Feel free to combine various testing devices to make the test more accurate
10. Special Instrument Toolbox, Contains Foam Shockproof Encasement, Easy to Transport, Save and Carry
11. Lithium battery powered, no need to replace the battery
12. Smart Charging, Safe Charging, Extend Battery life
Principle
The Force Gauge detects the push-pull load through the built-in Sensor, converts the mechanical signal into an electrical signal, and displays the measurement result through the LCD screen after processing. It supports two Operating Modes: real-time tracking and peak holding.
Applications
Pushing and pulling force load test, insertion force test, failure test
Steps
1. Power on and select the desired unit
2. Set Operating Mode (Real-Time Tracking or Peak Hold) as needed
3. Set the upper and lower limit qualification interval
4. Set the peak hold time
5. Set the gravitational acceleration value
6. Set the automatic shutdown time
7. Connect the testing device and fixture
8. Conduct test operations
9. Read display data
10. Automatic shutdown after the test is completed
Notice
• Ambient Temperature should be in the range of 0 ℃ -40 ℃
Storage temperature should be in the range of -20~ 70 ° C
• relative humidity should be kept at 15% -80%
• Should be used in an environment without vibration and corrosion
• Use the matching charger when charging (AC input 220V/50HZ, DC output 5V/1A)
• Charging time is about 4 hours to avoid overcharging
• The continuous use time is about 25 hours, pay attention to charging in time
• Use a special instrument toolbox for transportation and storage
• Avoid violent vibrations and impacts
