Overview
ANYTY 3R-PMGM1500A Portable high magnification depth measurement instrument is a simple and powerful High Accuracy 3D measurement device based on Android system. The product can be used for high magnification microscopy teaching and acquisition in the laboratory or in the field, and is suitable for many fields such as metallographic detection, material detection, Spinning & weaving printing.
Features
1. Integrated design, compact and portable, simple and convenient operation, powerful functions
2. A variety of magnification objectives are available, and three different objective magnifications can be installed at the same time, with magnifications up to 1500 times
3.7-inch LCD touch screen
4. Based on Android system, support in-depth development
5. Support diversified data processing
6. Automatically generate PDF reports, one-click archiving, one-click sharing
7. Precision autofocus + manual focus dual selection
8. Through wifi or USB output interface, the captured images and detection results can be stored and managed in time, and data can be sent and printed remotely to form remote process mass collaborative diagnosis
9. You can connect an external Bluetooth mouse to move the mouse roller up and down for fine fine fine-tuning up and down; you can not only use the buttons on the touch screen, but also operate with the help of the remote control button
10. Seven measurement functions: measurement function accurate to micron level, support length, angle, depth, area and other measurement functions
11. The instrument is equipped with a micro scale as standard, and its own APP allows users to automatically calibrate the function. When the measurement data deviates, the user can proofread it by himself
Principle
The measurement instrument is based on the deep development of Android system, uses CMOS photosensitive chip for image acquisition, and realizes High Accuracy measurement through precision autofocus and manual focusing system. The instrument supports a variety of measurement functions, including length, angle, depth, area, etc. Measurement accuracy can reach micron level.
Applications
A variety of large-scale workpiece surface length, width measurement work and surface analysis, chemical etching, electronic engraving, laser engraving, surface scratch and other graphics for data measurement, observation of pores on plant surfaces, aerospace, boiler special inspection, large molds, electric power, university scientific research
Steps
1. Boot up the device
2. Select the measurement function via touch screen or remote button
3. Use autofocus or manual focus to focus
4. Perform measurements of length, angle, depth, area, etc
5. Automatically generate PDF reports
6. Store and share data via wifi or USB
Notice
• Make sure the battery is fully charged before use
• When the measurement data deviates, you can use the automatic calibration function of the instrument to proofread
• Fine fine-tuning operation can be performed through an external Bluetooth mouse
• Support remote data sending and printing functions
• Continuous Operating Time is recommended to be no more than 2 hours
