Overview
The HI93708-01 is a HANNA brand high-concentration nitrite photometer Reagent with a high-mass design for pre-measurement, allowing users to achieve fast and accurate Colorimetric measurements. The Reagent follows an adaptation of the ferrous sulfate method to react with nitrite resulting in sample Color changes, Color intensity is determined by a compatible photometer, concentration is displayed in milligrams per liter (ppm) of nitrite, suitable for samples in the 0 to 150 mg/liter nitrite range.
Features
1. Pre-measurement of high-mass Reagents to ensure fast and accurate measurement
2. Adapted by ferrous sulfate method, responsive
3. Provide 100 test times, economical and practical
4. Designed for high concentration nitrite measurement, range 0 to 150 mg/L
5. Compatible with photometer, easy to operate
Principle
HI93708-01 Reagent follows an adaptation of the ferrous sulfate method where the reaction between nitrite and Reagent results in a change in Color in the sample. Color intensity is determined by a compatible photometer and concentration is shown in milligrams per liter (ppm) of nitrite.
Applications
Water quality analysis, environment monitoring
Steps
1. Prepare samples and compatible photometers
2. Add pre-measured HI93708-01 Reagent
3. Wait for the reaction to complete and observe the Color change
4. Color intensity measurement using a photometer
5. Read the displayed nitrite concentration value
Notice
• Only for compatible photometers
• Measurement range limited to 0 to 150 mg/L nitrite
• Use strictly according to the operation steps
• Pay attention to Reagent storage conditions
• Avoid Contaminating Samples and Reagents
