Overview
SZQ-250 (160mm) single-sided Applicator is a manual laboratory coating applicator of HuiNuo brand. The film thickness is 250μm, the application width is 160mm, and the accuracy is +/- 2μm. The product is made of high-carbon chromium wear-resistant and anti-corrosion stainless steel. Before leaving the factory, it is tested by imported three-coordinate dimensional accuracy to ensure film accuracy. It is suitable for paints, glues, Coatings, inks, chemical New materials and other Moulding, and can be equipped with Film Applicator for automatic film scraping.
Features
1. Made of 9Cr18Mo High Hardness Stainless Steel, with Good Abrasion Resistance and corrosion resistance, Hardness value of 50~ 55HRC
2, accuracy up to +/- 2μm to ensure experimental accuracy
3. Smooth surface, diverse styles, wide range of applications, support for customized specifications
4. Adopt imported three-coordinate detection accuracy, with factory inspection report, can stand Measurement
Principle
The Film Applicator is a manual laboratory Film Applicator that is scraped onto a substrate by a coating surface of a specific thickness to form a uniform wet-film layer for subsequent experimental analysis.
Applications
Paints, Adhesives, Coatings, inks, Chemical New materials
Steps
1. Prepare Substrate and Sample for Spreader
2. Place the Applicator on the Substrate
3. Manual uniform scraping of samples
4. Remove Applicator to form wet-film
Notice
• Check if Applicator's surface is clean before use
• Maintain uniform strength and speed when scraping
• Clean Applicators After Use
• Avoid scratching the Applicator's surface with hard objects
Store in a drying environment
