Overview
HUITAO HT-D270 Carpet Caster Wear resistance Tester is a professional equipment used to test the wear resistance performance of carpet, resilience floor and other paving materials under the load of casters. The equipment adopts swirl/spin friction method, has automatic control and intelligent Operating interface, and is suitable for a variety of standard testing requirements.
Features
1. Meet a variety of carpet foot wheelchair load measurement standards
2. The foot wheel can be automatically lifted and lowered, reducing the risk of manual operation
3. The sample stage adopts an open design, and the experimental results can be observed directly on the test stage when the experiment is stopped
4. The infrared protection device uses infrared diffuse reflection Sensor to monitor the test area. If there is a human body or foreign body entering, the swirling/spinning foot wheel and the test bench will automatically stop to avoid dangerous accidents
5. The test bench and the foot wheel share the same motor drive to ensure the conformity of the relative Rotation speed and steering
6. The suction trend height of the vacuum device is automatically adjusted according to the thickness of the carpet to ensure good suction effect
7. Easy to display, operate and control through Touchscreen
8. The instrument is designed to be user-friendly, automated, and intelligent, making it easy to operate, maintain, and repair
Principle
The testing machine simulates the actual use of casters on carpets or resilience paving materials by driving the test bench and the foot wheel swirl/spin by a motor. The test bench and the foot wheel share the same motor to ensure that the relative Rotation speed and steering are consistent, while the vacuum device automatically adjusts the suction trend height to optimize the suction effect, and the infrared Sensor monitors the safe area in real time.
Standards
EN425、GB/T 2611-2077、GB/T 5226.1-2008、GB/T 38142-2019、ISO 4918、ASTM D6962-12、NF P62-102、DIN EN 985、DIN EN 425、JIS L4406:2000、QB/T 2755-2005
Steps
1. Prepare the sample and place it on the test bench
2. Set test parameters such as Rotation speed and duration through Touchscreen
3. Start the device, foot wheel and test bench automatically swirl/spin for testing
4. Infrared Sensor monitors safety during the test, and automatically stops if there is any abnormality
5. After the test, observe the results directly on the open test bench
6. Use a vacuum cleaner to clean the test area
Notice
• Ensure Operating Environment Temperature at 0~ 40 ℃, relative humidity < 80%
• Power supply needs to be AC220V +/- 10%, 50Hz, Power 2000W
• Check that the infrared protection device is functioning properly before the test
• Avoid human or foreign objects from entering the test area to prevent danger
• Regularly maintain the vacuuming device to ensure the suction effect
• Follow the Touchscreen prompts when operating to ensure that the parameters are set correctly
