Overview
TAISITE SH-3 Magnetic Stirrer is a mixing and heating laboratory equipment. It uses an all-aluminum pull-up heating plate, which conducts heat quickly and evenly distributes temperature. It is equipped with a powerful motor and an ultra-strong magnetic pole. It is suitable for stirring a variety of liquids, including Tack materials. It is designed with a tilted fully enclosed control panel for enhanced protection.
Features
1. Adopt all-aluminum pull-up heating plate, surface anti-corrosion treatment, rapid heat conduction, uniform temperature distribution.
2. Equipped with powerful motor, can be used to stir Tack material.
3. Using super strong magnetic pole, strong magnetic, can effectively prevent the stirrer from jumping.
4. Tilt fully enclosed control panel design to prevent overflow of liquid erosion Control system.
5. Strong structure, the outer material is iron cast zinc and through the surface resistance crystal painting.
6. Supports continuous operation, with a stirring capacity of up to 1000ml.
Principle
The Magnetic Stirrer generates a swirl/spin magnetic field by driving an internal magnet through a motor. A magnetic stirrer is placed in the container placed on the heating plate, and the stirrer synchronizes the swirl/spin under the action of the swirl/spin magnetic field, so as to realize the stirring and mixing of the liquid in the container. At the same time, the heating plate is electrically heated to provide uniform heating for the container.
Applications
Chemical experiments, biological experiments, pharmaceutical research and development, food testing, teaching demonstrations
Standards
The product information does not mention the specific standards it meets.
Steps
1. Place the device on a stable table and connect the AC 220V power supply.
2. Place the container containing the liquid to be stirred in the center of the heating plate.
3. According to the material of the container and the properties of the liquid, put the appropriate magnetic stirrer into the container.
4. swirl/spin speed adjustment knob (scale representation), set the desired stirring Rotation speed from low speed.
5. If heating is required, the heating function can be turned on and adjusted to the required temperature (the specific heating Control mode information is not detailed).
6. After use, turn off the heating and stirring functions, unplug the power supply, and clean the equipment after chilling down.
Notice
• Power supply voltage AC220V, consistent with equipment requirements.
• The maximum stirring capacity of the equipment is 1000ml, please do not use it in excess.
• When the heating plate is working and just stops working, the temperature is high, do not touch it with your hands to prevent burns.
When placing the container, make sure that the bottom of the container is flat, clean, and in full contact with the heating plate.
• When mixing large materials, it is recommended to start at a lower Rotation speed to avoid overloading the motor.
• When the liquid is injected into the container, it should not be too full, and pay attention to the smooth operation to prevent the liquid from overflowing and erosion of the control panel.
• Always disconnect power before cleaning equipment and wait for it to chill down completely.
Do not use the equipment in a humid or flammable environment.
• The maximum load-bearing capacity of the equipment tray is 10kg, please do not place overweight items.
