Overview
UV UV curing film Applicator Rxg-01/400uv is an application width of 400mm roll-to-roll film equipment, equipped with UV ultraviolet curing function, using scratch coating method, dedicated to coating UV glue on the release film.
Features
1.The application width of 400mm, suitable for a variety of film requirements
2. Equipped with UV ultraviolet curing system, Wavelength range 350-450nm, Main peak wave 365nm
3. Scratch coating method to ensure uniform Spreader
4. Adjustable production speed, range 0-5m/min, adapt to different production rhythms
5. Unwinding System with Tension Control for Improved Operating Stability
6. Use Touchscreen control (Kunlun Tongtai brand), easy to operate
7. Integrated Laminating and UV curing for continuous production
Principle
The device feeds the coil into the unwinding system, uses scraping to uniformly Spreader UV glue on the release film, then laminating, then curing with UV ultraviolet light, and finally completes the coil collection through the winding system. The UV light curing system uses the main peak wavelength of 365nm to effectively cure UV glue in the range of 350-450nm.
Applications
Release film coating UV glue, coil film processing
Steps
1. Unwinding: Release the coil through the Tension Control system
2. Scrape coating: Spreader UV glue evenly on the release film
3. Laminating: Laminating the material after Spreader
4. UV curing: UV curing in 400 * 1000mm area
5. Winding: Collect the cured coils into rolls
Notice
• Power supply voltage is 220V to avoid voltage mismatch
• Check the connection status of the air shaft and the aviation plug before operation
• The production speed is controlled within the range of 0-5m/min, do not run at excessive speed
• Regular maintenance of UV curing system to maintain wavelength Stability
• Use 3-inch rolls that meet specifications to prevent equipment damage
