KORNO MOT500-CO-Y carbon monoxide Detector, intelligent gas transmitter 2.4-inch color screen display

Name: KORNO MOT500-CO-Y carbon monoxide Detector, intelligent gas transmitter 2.4-inch color screen display
Brand: KORNO
SKU: NB048447
Price: 280.0 USD
Availability: InStock

$ 280.00Ex works

Using 32-bit microprocessor and 24-bit ADC chip, equipped with 2.4-inch IPS high definition screen, supports multi-Sensor and multiple signal output, with self-diagnosis and protection functions to ensure high Reliability and accurate measurement.

Model

MOT500-CO-Y

Get Quote

Category : Carbon Monoxide Tester

Brand : KORNO

SKU : NB048447

Service :The delivery and service By NBCLab.Com

Overview

MOT500 type is an online intelligent Gas detector (transmitter) with 2.4 inch IPS color screen display, using large-scale integrated circuit technology and international standard intelligent technology design, with high Stability, communication and self-diagnosis function, easy installation and maintenance, to meet the requirements of high Reliability of equipment for industrial site safety monitoring. Widely used in petroleum, chemical, metallurgy, refining, gas transmission and distribution, biochemical and other industries, compatible with various control alarms, PLC, DCS and other Control systems, remote detection, control, alarm, with computer storage Data, Data analysis and other functions.

Features

Ultra-low power 32-bit microprocessor and 24-bit ADC data collection chip using new semiconductor nanotechnology 2.2.4 inch IPS industrial high definition screen, resolution 320x240 3. Support 1-6 Sensors, all-in-one composite gas does not support 4-20mA output 4. PPM, mg/m3 two concentration units can be freely switched 5. Standard multiple signal output modes: 4-20mA output, RS485 output, relay output 6. Signal transmission methods: cable, network cable, 433MHz wireless transmission, GPRS wireless transmission 7. Sensor up to 6 target point Adjustment to ensure measurement accuracy and linearity 8. With manual zero and target point calibrating, factory reset and analog output Adjustment 9. With wide voltage input, short circuit protection, reverse connection protection, anti-static interference, anti-magnetic field interference and other functions, with automatic recovery function 10. Compatible with various remote control equipment: PLC, DCS, control alarm, secondary instrument, etc 11. Shell hard oxidation, explosion-proof and corrosion-proof, can be used in harsh environments for a long time 12. Optional Temperature & Moisture Sensor, on-site sound and light alarm, etc

Principle

The intelligent gas transmitter is designed with large-scale integrated circuit technology and digital and analog mixed communication technology. Sensor detects gas concentration and converts the data into electrical signal output. It supports a variety of transmission methods to realize remote monitoring and control.

Applications

Petroleum, chemical industry, metallurgy, refining, gas transmission and distribution, biochemical

Standards

GB3836.1-2010 "Explosive environments - Part 1: Equipment - General requirements", GB3836.2-2010 "Explosive environments - Part 2: Equipment protected by flameproof enclosures" d "

Steps

1. Installation equipment: Wall-Mounted, piped or flow-through installation 2. Power Supply: Power Supply 24VDC (12~ 30VDC) 3. Select signal output: 4-20mA, RS485 or relay output 4. Select the transmission method: cable, network cable, wireless or GPRS transmission 5 calibrated Sensor: manual zero and target point calibrated 6. Set the alarm: regular high and low alarm or interval control mode 7. Connect and receive equipment: computer, PLC, DCS, mobile phone, etc 8. Monitoring data: real-time monitoring through screens or remote devices

Notice

Detect gas
Carbon monoxide (CO), imported electrochemistry /NDIR infrared carbon monoxide gas Sensor
Measurement Range
0-50ppm
resolution
0.01ppm
Response Time
≤ 20 seconds (T90)
Linearity
≤±1%
detection accuracy
≤ +/- 1% (depending on the Sensor)
Zero drift
≤ +/- 1% (F. S/year)
recovery time
≤ 20 seconds
Repeatability
≤±1%
gas expansion
Supports 1-6 Sensors (Optional)
Explosion-proof certification
CNEx16.0547
Protection Rating
IP65
production license
Guangdong 00001052 (CMC metrology authentication)
Humidity
Optional accessories, temperature detection Range: -25~ 60℃, Humidity detection Range: 0~ 95% RH
Detection method
Diffusion, flow, pump suction optional
Installation method
Wall-Mounted, Pipeline Type (Thread Size: M40X1.5mm), Flow Type
signal output
① 4-20mA signal: standard 16-bit accuracy 4-20mA output chip, transmission distance 1Km ② RS485 signal: using standard MODBUS RTU protocol, transmission distance 2Km ③ Voltage signal: 0-5V, 0-10V output, can be set by yourself ④ Optional 4-20mA + Hart output ⑤ Switching signal: standard 2 sets of relays, optional third set of relays, passive touch point, capacity 220VAC 3A/24VDC 3A
transmission method
① Cable transmission: 3-core, 4-core cable, long-distance transmission (1-2 kilometers) ② TCP/IP transmission: support TCP/IP protocol, use optical fiber, network cable, long-distance real-time transmission through intranet, extranet (optional) ③ GPRS transmission: can be built-in GPRS module, real-time remote transmission of data, without distance restrictions (optional) ④ Wireless transmission: support 433Mhz, radio transmission mode, transmission distance 2-10Km, depending on different Power (optional)
receiving device
User computer, control alarm, PLC, DCS, mobile phone, tablet computer, etc. are optional
Alarm mode
On-site sound and light alarm, external alarm, remote controller alarm, computer data collection software alarm, mobile app notification, SMS alarm optional
Alarm settings
① Standard configuration two-level alarm, optional three-level alarm ② Gas Sensor can set two alarm modes of conventional high and low alarm and interval control, which can control the concentration Range of gas ③ Temperature sensor can set the control Range ④ Humidity Sensor can set the control Range
shell material
Die casting aluminum + sand blasting oxidation/fluorocarbon paint, explosion-proof and anti-corrosion
Operating temperature
-30~ 50℃ (Humidity environment requires customization or optional pretreatment system)
Operating humidity
≤ 95% RH, non-condensing
Operating Pressure
0 ~ 100Kpa
Power Supply
24VDC（12~30VDC）
Size
200*149*79mm(L*W*H）
weight
1.5Kg
execution standard
GB3836.1-2010 "Explosive environment - Part 1: Equipment - General requirements" GB3836.2-2010 "Explosive environment - Part 2: By flameproof enclosure
optional Range
0-100、500、1000、2000、5000、10000、40000ppm

[Q] Is the price listed on the website the final cost for overseas purchases?

[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.

[Q] What is the specific process for purchasing the product?

[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.

[Q] What should I do if the instrument I purchase needs repair?

[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.

CATEGORIES