Overview
Rxg-02/300 small coil oven Coater is a factory direct sales Spreader bonding equipment. It consists of a body, a gluing width adjustment device, a discharge rack, a coating roller group, a Film thickness adjustment dial, a transmission platform, a traction roller group and a transmission mechanism. The effective Spreader width of the machine is ≤ 300mm, and the coating speed is adjustable from 0 to 20m/min. It is suitable for gluing and bonding processes of various substrates.
Features
1. The body adopts the combination of aluminum alloy and high electrostatic spray plate, and the structure is stable.
2. Equipped with double discharge racks and automatic deviation correction device to ensure accurate alignment of the cladding materials.
3. The coating roller group is made of double-drum precision machining parts, with smooth transmission.
4. Spreader Film thickness can be finely adjusted by dial meter and handwheel, range 0.005~ 3mm.
5. The transmission platform is made of stainless steel to ensure the smooth transmission of the substrate.
6. Wide drying temperature range (RT +~ 200 ℃), length 2 meters, power 1KW, to meet the drying needs.
7. The bonding width is adjustable from 100 to 300mm, and the bonding accuracy is 0.5mm.
Principle
The device supplies the substrate through the discharge rack, and defines the Spreader area through the glue width adjustment device. When the substrate passes through the rubber roller group, the glue is evenly coated, and the Spreader Film thickness is precisely controlled by the dial meter and the handwheel adjustment mechanism. The glued substrate is smoothly transported through the stainless steel transmission platform, and the Spreader process is completed through the clamping and traction of the traction roller group. If the coating operation is carried out, the automatic deviation correction function of the double discharge rack ensures that the two layers of materials are aligned. The material after the Spreader can enter the drying tunnel for drying and curing.
Applications
Coil Spreader, Material Bonding, Adhesive Coating, Film Processing, Experimental Research and Development, Small-scale Production
Steps
1. Install the substrate on the discharge rack and pass through the gluing width adjustment device.
2. According to the demand, swirl/spin the hand wheel on the rubber roller rack, combined with the indicator, adjust the film thickness.
3. Manually pull the substrate between the upper and lower rollers of the traction roller.
4. Tighten the handwheel of the rack, so that the rubber ring of the upper roller of the traction roller is in contact with the lower roller, and clamp the substrate.
5. Start the equipment, and the traction roller group drives the substrate forward to complete the Spreader operation.
6. If the double material is combined, ensure that the materials of the two discharge racks are aligned, and the deviation correction device will automatically adjust.
7. After the Spreader is completed, the material can be guided into the drying tunnel for drying according to the process requirements.
Notice
• Before operation, make sure that the Power frequency (220V) meets the requirements and check whether the components of the equipment are in good condition.
• When adjusting the film thickness, please slowly swirl/spin the handwheel and closely observe the dial meter reading to avoid excessive adjustment.
When pulling the substrate, pay attention to hand safety and avoid getting involved in the roller group.
• During the operation of the equipment, do not touch the moving parts and high-temperature drying tunnel parts.
• The maximum roll diameter of both discharge and receipt is 300mm, please do not use it beyond the limit.
• Regularly clean the coating roller group and transmission platform to keep the equipment clean.
• Non-professionals should not disassemble or adjust the core components of the equipment.
