Overview
The 500mL Glass Jacket Cup is a professional laboratory temperature control vessel made of high-quality Glass, with chemical corrosion resistance and good transparency. The double-decked jacket design supports the precise regulation of the temperature of the inner tank through water bath or Miscellaneous liquid medium to meet the needs of a variety of experimental environments. The inner tank capacity is 500mL, suitable for mixing, reaction and thermostatic experiments. The outlet hole length is 3cm designed to facilitate the connection of temperature control equipment to ensure smooth circulation of fluid media. The structure with an outer diameter of 11cm and a height of 14cm is compact and practical, stable and easy to operate. It is a reliable temperature control solution for scientific research laboratories and industrial research and development.
Features
1. High-quality Glass material, with chemical corrosion resistance and good transparency.
2. Double-decked jacket design supports precise temperature regulation via water bath or Miscellaneous liquid medium.
3. The inner tank capacity is 500mL, suitable for mixing, reaction and thermostatic experiments.
4. The length of the outlet hole is 3cm, which is convenient for connecting temperature control equipment and ensuring smooth circulation of the fluid medium.
5. Compact and practical, with an outer diameter of 11cm and a height of 14cm, it is stable and easy to operate.
Principle
The glass clip cup works through its double-decked jacket structure. When in use, water or Miscellaneous liquid medium can be passed into the jacket, and the medium can be heated or chilled down by an external temperature control device. The medium is in the jacket for domestic circulation, so as to achieve precise temperature control of the sample or reaction system in the inner tank.
Applications
Research laboratories, industrial research and development
Steps
1. Place the Glass Clamp Cup on a smooth operating table.
2. According to the experimental requirements, connect the pipeline of the temperature control equipment to the outlet of the jacket cup.
3. Inject water or Miscellaneous suitable liquid medium into the jacket.
4. Start the external temperature control equipment, set the required temperature, so that the medium in the jacket domestic circulation.
5. Put the sample or reactant to be treated into the inner tank for experimentation.
6. After the experiment, turn off the temperature control device, disconnect it, and clean the container properly.
Notice
• Check Glass containers for crazing or damage before use to ensure they are nondestructive.
When connecting temperature control equipment, make sure that the pipeline connection is firm to prevent media leakage.
• The medium temperature of the injection jacket should not exceed the tolerance limit of the Glass material to avoid sudden cooling and sudden heating.
• Please pay attention to safety during operation to avoid burns or frostbite.
• Use a suitable detergent when cleaning to avoid scratching the inner wall with sharp objects.
• Please select the appropriate liquid medium according to the experimental requirements and ensure its compatibility with the Glass material.