Overview
The 4-sided Applicator is an experimental film appliance with an accuracy of +/- 2 microns. It is made of high-carbon chromium wear-resistant stainless steel and has good corrosion resistance. The Film Applicator will perform accuracy testing before leaving the factory, using imported three-coordinate testing, and comes with factory test data reports, which can stand up to Measurement. The SZQ 4-sided film applicator is suitable for sample Moulding proofing in Resin, Coating, Glue, New material, Polymer material and other fields. Support non-standard customization, and can also be matched with the laboratory Automatic Film Applicator for automatic film. SZQ-150 15/30/60/90μm film thickness of 15μm, 30μm, 60μm, 90μm, application width 150mm, total length 180mm, is an extended type 4-sided Applicator.
Features
1. 9Cr18Mo High Hardness Stainless Steel, with Good Abrasion Resistance and corrosion resistance, Hardness value of 50~ 55HRC
2, accuracy up to +/- 2μm to ensure experimental accuracy
3. Smooth surface, diverse styles, wide range of applications, support for customized specifications
4. Adopt imported three-coordinate detection accuracy, with factory inspection report, can stand Measurement
Principle
4-Sided Applicator Spreader sample material uniformly on the substrate surface to form a specific thickness of wet-film with precisely designed film thickness and application width. Its High Accuracy structure and wear-resistant material ensure film process Stability and Repeatability, suitable for laboratory sample preparation.
Applications
Resin, Coating, Glue, New material, Polymer material
Steps
1. Prepare Substrate and Sample Materials for Spreader
2. Choose the right thickness 4-sided Applicator
3. Place the Applicator on the Substrate
4. Evenly Push Applicators to Spreader
5. Clean the Applicator after finishing the film
Notice
• Check if Applicator's surface is clean before use
• Avoid collisions with hard objects to prevent damage to accuracy
• Clean and store properly after use
• Non-standard customization needs to provide specific specifications
