Overview
Double-sided Coil Automatic Film Applicator (Model: Rgd-01/500TS) is a device for double-top coating of coils. The machine adopts aluminum alloy and stainless steel plate body, is equipped with double roller painting film, drying, deviation correction and winding functions, and can achieve a Spreader Film thickness of 0.001-2mm. Spreader accuracy is +/- 5%, and the coating speed is adjustable in the range of 0~ 20m/min.
Features
1. The machine body is made of aluminum alloy and stainless steel plate, with a stable structure.
2. Equipped with a gluing width adjustment device, composed of food-grade plastic and adjustable braces.
3. It is equipped with two discharge racks and an integrated automatic deviation correction device to ensure the alignment of materials during the laminating process.
4. Spreader Film thickness range is wide (0.001-2mm), high accuracy (+/- 5%), Graduation is 0.001mm.
5. The coating speed can be adjusted within the range of 0~ 20m/min to adapt to different production needs.
6. Equipped with drying tunnel, the temperature range can reach room temperature to 150 ℃.
7. The transmission platform is made of stainless steel to ensure the smooth transmission of the substrate.
Principle
The equipment is unrolled through the discharge rack, and the substrate is preader through the double roller painting film mechanism. The film thickness of the Spreader can be precisely controlled by the film thickness adjustment dial table (digital thousands head). The substrate after the Spreader is transferred to the drying channel through the stainless steel transmission platform for drying, and then adjusted by the deviation correction device. Finally, it is pulled by the traction roller group and the winding mechanism completes the winding.
Applications
Coil Spreader, Film Composites, Material Lamination
Steps
1. Place the substrate on the discharge rack.
2. Adjust the glue width adjustment device according to needs.
3. Set the required Spreader Film thickness through the Film thickness adjustment dial.
4. Manually pull the substrate between the upper and lower rollers of the traction roller.
5. Tighten the handwheel on the rack so that the rubber ring of the upper roller of the traction roller comes into contact with the lower roller.
6. Start the equipment, and the traction roller group pulls the substrate through the Spreader, Drying, and Correction processes.
7. After the Spreader is completed, the rewinding mechanism will rewind the volume.
Notice
• The power supply of the equipment host is 380V/2KW, please make sure the power supply matches.
• Spreader width does not exceed 500mm, please refer to the specifications for unwinding and winding diameter.
• When operating, please ensure that the traction roller group is correctly pressed before starting the transmission.
• The maximum temperature of the drying tunnel can reach 150 ° C. Please pay attention to high temperature protection during operation.
• Equipment dimensions may vary depending on customization, please refer to the actual situation.
• Regularly check the operating status of the deviation correction device and transmission components.
