Overview
Chengyue CY-O1200-φ 50-200-T tube furnace adopts high-mass wirecoil for heater as heating element, heating temperature can reach 1200 ℃, quartz furnace tube diameter is 50mm. Support customized larger tube diameter furnace tube and multi-temperature zone heating, each temperature zone is PID temperature control by precision temperature control instrument, can edit 30-section liter cooling program, equipped with overheating and broken couple protection function. The flanges on both sides of the furnace tube are equipped with digital vacuum gauge and mechanical pressure gauge for controlling the atmosphere environment in the furnace tube. The high-definition true color touch screen operation is simple and easy to use, which can greatly improve the experimental efficiency.
Features
1. High mass wirecoil for heater heating element, heating temperature up to 1200 ℃
2. The pipe diameter of quartz furnace pipe is 50mm, and it supports customization of larger pipe diameter
3. Default single temperature zone, multi-temperature zone heating can be customized, and PID temperature control in each temperature zone
4. Editable 30-stage heating and cooling program
5. With overheating and break protection functions
6. The flanges on both sides of the furnace tube are equipped with digital vacuum gauges and mechanical pressure gauges to control the atmosphere environment
7. High-definition true color touch screen operation, simple and easy to use
8. Non-professionals can be proficient with simple training to improve experimental efficiency
Principle
The tube furnace generates high temperature through the heating element of the wirecoil for heater, up to 1200 ° C. Precision temperature control instruments are used for PID temperature control to ensure temperature stability. The flanges on both sides of the furnace tube are equipped with vacuum gauges and pressure gauges to adjust the atmosphere in the furnace tube and support heat treatment in vacuum and atmosphere environments. Automated operation is achieved by setting the temperature rise and drop program through the touch screen.
Applications
Metallurgy, Glass, Heat treatment, Lithium cathode materials, New energy, Abrasives, Heat treatment in atmosphere environment, CVD system, Coating test production
Steps
1. Power supply AC: 220V 50Hz
2. Set the heating and cooling procedure through the touch screen
3. Adjust the atmosphere environment in the furnace tube as needed
4. Start the heating program to conduct the experiment
5. Turn off the power after the experiment
Notice
• Operating temperature does not exceed 1050 ℃
• The heating rate is recommended to be within 10 ° C/min
• Make sure the power connection is correct before use
• Pay attention to safety during operation to avoid burns
• Regularly check equipment sealing and Vacuum Levels
