Overview
Automatic Film Applicator is a device used for intermediate coating film in laboratory. It replaces manual film and automatically films to improve the accuracy and efficiency of film. The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate by controlling the Spreader head and Spreader parameters to form the desired film. This Film Applicator is a bar type Automatic film applicator with heating and Vacuum chuck function, innovative bar Installation method and clamshell Drawdown blade greatly improve the efficiency of Spreader, easy to clean, support speed control and application length adjustment, suitable for laboratory High Accuracy automatic film, Moulding proofing in laboratories such as University Research Institute, New material, lithium battery, glue, Resin, etc.
Features
1. Surface hard treatment Aluminum alloy countertop, Hardness and wear resistance, Smoothness of countertop is detected by imported High Accuracy instrument
2. Big brand differential regulator, high film thickness control accuracy
3. With heating and Vacuum chuck function
4. High Accuracy film applicator, original imported bar film uniform accuracy
5. Touchscreen control panel, easy to operate
6. Free adjustment of application length and Spreader speed
Principle
The Working Principle of Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. The bar coating method is used, combined with Vacuum chuck to fix the substrate, and the automatic film is realized by adjusting the coating speed and length.
Applications
Moulding proofing in research institutes of universities, New materials, lithium batteries, glues, Resin and other laboratories. Suitable for coating, inks, paints, Stock, lithium batteries, Pressure sensitive adhesives, Resin, glues, polymer materials, pharmaceuticals and other film samples, can be scraped on Glass, cardboard, cloth.
Steps
1. Prepare the substrate and samples
2. Place the substrate on the Spreader table and turn on the Vacuum chuck to fix
3. Set Spreader parameters (speed, length, temperature, etc.)
4. Install bar film applicator
5. Start the film program
6. Turn off the equipment after finishing the film and clean the Spreader head
Notice
• Check the power supply and vacuum pump status of the equipment before operation
• Ensure that the substrate is fixed flat on the Spreader table
• Select appropriate Spreader parameters based on sample properties
• Regularly clean the Spreader head and countertop to keep the equipment hygienic
• Turn off the heating and vacuum functions in time after use
