Overview
Spreader hydrogel Coater is a device for preparing hydrogel films or coatings with specific performance on the surface of a substrate. This Rxg-01/300csh model Coater has a slitting function and supports UV curing. It is suitable for the production of hydrogel products in the fields of medical, cosmetics, hygiene products, etc.
Features
1. Integrated Spreader and slitting function, support UV curing.
2. Adopt servo control system and Touchscreen (Kunlun Tongtai) control, easy to operate.
3. Unwinding with tension control to ensure Spreader uniformity.
4. Equipped with inflatable shaft, toolbox, etc., with high functional integration.
Principle
The device uniformly coats the hydrogel on the surface of the substrate through processes such as unwinding, Spreader, bonding, drying, and slitting. After Spreader, the coating curing is carried out through a drying (or UV curing) process, and finally the wide-width material is cut into the required size through a transverse slitter.
Applications
Medical, cosmetics, hygiene products
Steps
1. Install the substrate roll to the release spool and set the tension.
2. Prepare hydrogel coatings in the Spreader unit.
3. Set production speed, slitting parameters, etc. through Touchscreen.
4. Start the equipment, Spreader, laminating, drying (or UV curing) process.
5. The material is sliced horizontally through the slitting unit.
6. Collect the finished product after slitting.
Notice
Before operation, make sure that the power supply is three-phase 220V and check that the equipment is grounded.
When installing the roll, please note that the roll diameter range is 500-700mm.
* When using the slitting function, install a vertical cutter (up to 3) as required.
The operating speed range of the equipment is 0-5m/min, please set it reasonably according to the process requirements.
Regularly maintain the gas circuit, circuit and transmission components to ensure the stable operation of the equipment.
Operators should be familiar with the Touchscreen control system, and non-professionals should not operate it.
