Overview
The DADI DJ1C-120W powerbasic stirrer features a permanent magnet DC motor with low noise, zero start, and affordable price. The equipment is suitable for use in scientific research, Universities & colleges, and factory laboratories.
Features
The controller adopts fast 1T single chip microcomputer as the core component, and uses pulse width modulation (PWM) DC speed regulation technology, which has high speed regulation accuracy, fast Response speed, wide speed regulation range and low loss.
2. The driver part refers to the CMOS transistor.
3. The motor part is made of permanent magnet DC motor, which has the characteristics of stable speed and low noise.
4. Stirringrod made of stainless steel, corrosion resistant.
5. Adopting an independent control box design, it can be operated away from the workbench.
Principle
Driven by a permanent magnet DC motor, the Stirrer realizes accurate, fast and wide range adjustment of motor speed through the fast 1T microcontroller core and pulse width modulation (PWM) DC speed regulation technology in the controller.
Applications
Research, Universities & colleges, Factory Laboratories
Steps
1. Familiar with the manual and the functions of each part of the control box panel.
2. Install the components and adjust the height as required.
3. Turn on the power switch.
4. Set the time.
5. Adjust to the required speed and you can work.
Notice
• When using, if you find that the stirringrod is not centered or the Stir is unstable, please adjust the support chuck to make the stirringrod concentric. When using the triangular flask Stir, align the stirringrod with the center before turning it on.
• If the power supply suddenly fails during use, please check: ① whether the power cord plug is loose or peeling; ② whether the fuse is blown. If it is not the above situation, please contact our factory.
• Safe electricity use: This product uses 220V AC power supply, and the power socket should use a three-hole safety socket and need to be properly grounded.
