Please contact customer service
Double-sided extrusion coating method, Film thickness range 0.001-3mm, Spreader accuracy of +/- 5%. With automatic tension and deviation correction control, effective Spreader width ≤ 350mm, coating speed 0~ 20m/min adjustable, suitable for a variety of coils and coatings.
Category : R2R Coater
Brand : Factory
SKU : NB049120
Service :The delivery and service By NBCLab.Com
Double-sided coil Automatic Film Applicator (model: Rgd-00/350TSDC) is a equipment for double-top coating of coils. The machine is mainly composed of body, gluing width adjustment device, discharge rack, coating roller group, Film thickness adjustment dial table, transmission platform, traction roller group and transmission mechanism. It can realize the complete process from unwinding, soaking, double-sided extrusion Spreader to lateral slitting. It is suitable for a variety of coils and Spreader liquid types.
1. Adopt aluminum alloy and stainless steel plate structure, which is sturdy and durable. 2. Equipped with a gluing width adjustment device, it is composed of food-grade plastic and adjustable braces for easy adjustment. 3. With double discharge rack and automatic correction device, it can automatically adjust the material alignment, and the correction accuracy is +/- 1mm. 4. Spreader Film thickness range is wide (0.001-3mm), high accuracy (+/- 5%), Graduation is 0.001mm. 5. Adjustable coating speed 0~ 20m/min, effective Spreader width ≤ 350mm. 6. Equipped with automatic tension control (maximum 60N) and automatic deviation correction function. 7. Integrated horizontal slitting function allows the coil to be cut into sheets according to the preset length, and the edges can be trimmed. 8. Applicable to a wide range of coil types, including Plastic film, metal foil, paper, non-woven fabrics, etc.
The device is unrolled through a discharge rack. After the substrate passes through the dipping tank, the Spreader is double-sided squeezed by the coating roller group. The Spreader Film thickness can be precisely adjusted manually through the Film thickness adjustment dial table (digital decimal head). The substrate after the Spreader is smoothly transmitted through the stainless steel transmission platform, and the Spreader process is completed through the traction power of the traction roller group (manually tightening the handwheel to make the upper and lower rollers contact). At the same time, the equipment integrates an automatic deviation correction and tension control system to ensure that the Spreader is evenly aligned with the material, and finally can be transverse slitting or edge trimming through the slitting knife.
Plastic film Spreader, Metal Foil Spreader, paper Spreader, Non-woven Spreader
1. Place the substrate on the discharge rack. 2. Adjust the glue width adjustment device as needed. 3. Drag the substrate by hand between the upper and lower rollers of the traction roller. 4. Tighten the handwheel on the rack so that the rubber ring of the upper roller of the traction roller comes into contact with the lower roller. 5. Start the equipment, and the traction roller group pulls the substrate through the power transmission to complete the Spreader work. 6. Set and monitor Spreader Film thickness through Film thickness adjustment dial. 7. The equipment automatically performs tension control and deviation correction. 8. Perform horizontal slitting or edge trimming according to the preset.
• Please ensure that the air source pressure is within the range of 0.5 to 0.8MPa before use. • Equipment Operating Environment Temperature should be maintained at 10 ℃~ 40 ℃, humidity ≤ 70% RH. • The power supply of the host is 380V/2KW, please ensure that the power supply meets the requirements. • The maximum effective unwinding and rewinding diameter is 350mm, and the weight of the rewinding expansion bearing is 50KG. Please do not use it beyond the limit. • Spreader fluid types must be compatible with equipment, such as water-based paints, solar-based paints, UV coatings, etc. • Please pay attention to safety during operation and follow the process of manual adjustment and automatic control of the equipment. • Equipment dimensions and weight are reference values, subject to actual customization.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
