Overview
The 4-sided Film Applicator is a device for experimental manual film proofing of coatings, inks, paints, etc., and can also be placed on an automatic film machine for Moulding. It has four film thicknesses (25, 50, 75, 100 μm), an application width of 160mm, and is made of high-quality wear-resistant and corrosion-resistant alloy steel. The device can precisely control the thickness of wet-film or Dry-Film to ensure the conformity and Repeatability of coatings. It is suitable for routine quality control and research and development tests, such as hiding power, opacity, scruf resistance, sag resistance performance, etc.
Features
1. Made of 9Cr18Mo High Hardness Stainless Steel, it has good Abrasion Resistance and corrosion resistance, and the Hardness value reaches 50~ 55HRC.
The accuracy is up to +/- 2μm to ensure the accuracy of the experiment.
3. Smooth surface, diverse styles, wide range of applications, support for customized specifications.
4. Adopt imported three-coordinate detection accuracy, with factory inspection report, can stand Measurement.
Principle
The 4-sided Film Applicator uses its four film surfaces of different thicknesses (25, 50, 75, 100 μm) to uniformly Spreader coatings, inks or paints on the substrate to form a wet-film or Dry-Film with good conformity and Repeatability. Its High Accuracy design (+/- 2 μm) ensures precise control of film thickness to meet various mass testing needs.
Applications
Paints, inks, paints
Steps
Select the desired film thickness (25, 50, 75 or 100 μm) on the 4-sided Applicator.
2. Spreader by placing the Applicator on the substrate manually or using the Automatic Film Applicator.
3. Move the Applicator evenly to ensure that the application width is 160mm.
4. After completing the Spreader, check whether the film thickness meets the requirements.
Notice
• Check whether the Applicator surface is smooth before use to avoid affecting the film mass.
• Ensure that the substrate is flat during operation to prevent uneven film.
• Regularly clean the Applicator to maintain its wear and corrosion resistance.
• Provide detailed parameters when customizing specifications to ensure compliance with experimental requirements.
