Please contact customer service
Film width up to 1000mm, wet film thickness range of 0.005-3mm, Oven heating temperature up to 200 ℃. Using servo drive and PLC control, with automatic tension and correction functions, suitable for a variety of coils and Spreader liquid.
Category : R2R Coater
Brand : Factory
SKU : NB049306
Service :The delivery and service By NBCLab.Com
Rxg-10/1000pro automatic film applicator is a continuous experimental automatic film applicator with the functions of unwinding, scraping, drying and winding. The film width of the machine is 1000mm, the adjustment range of wet film thickness is 0.005-3mm, and the oven heating temperature can reach 200 ° C. It is suitable for Spreader experiments of UV coatings, self-adhesive, plaster and other materials.
1. Adopt PLC control and color Touchscreen man-machine interface, easy to operate and use. 2. The main drive adopts servo drive, the speed can be precisely set, and the coating speed can be adjusted within the range of 0.1~ 0.5m/min. 3. Equipped with hot air circulation oven, wide temperature control range (room temperature to 200 ℃), high temperature control accuracy (+/- 3 ℃). 4. With automatic tension control (range 5~ 50N, accuracy +/- 0.5N) and automatic correction function to ensure the stability of the belt. 5. Spreader Film thickness can be adjusted manually, regulator resolution up to 0.001mm, Spreader accuracy of +/- 5%. 6. The inflatable shaft is used for unwinding and rewinding, and the rewinding bearing capacity is up to 50KG. 7. The equipment structure adopts aluminum alloy and high electrostatic spray plate, the transmission platform is made of stainless steel, and the glue width adjustment device adopts food-grade plastic.
The device adjusts the unwinding and winding tension respectively by controlling the torque of the unwinding shaft and the rewinding shaft, and uses the swirl/spin linear speed of the main drive roller as the main driving speed to realize the stable belt control of the substrate. The Spreader process is as follows: after the substrate is unrolled, scraping is carried out through the adjustable drawdown blade, the wet-film after the Spreader enters the hot air circulation oven, the substrate is heated and dried by the electrically heated air, and then Laminating (roll pressing bonding) can be carried out, and finally the winding is completed.
Plastic film, metal foil, paper, non-woven fabric and other coils, Spreader water-based paints, solvent-based paints, UV coatings and other Spreader liquid experiments and production.
Power frequency meets 380V, 50Hz, three-phase five-wire standard.
1. Install the base material on the inflatable shaft discharge rack. 2. Set the required Spreader width through the gluing width adjustment device. 3. swirl/spin coating roller rack on the hand wheel, according to the Film thickness adjustment dial indicator value, set Spreader Film thickness. 4. Manually pull the substrate between the upper and lower rollers of the traction roller, and tighten the handwheel of the rack to make the rubber ring of the upper roller contact with the lower roller. 5. Set coating speed, oven temperature, tension and other process parameters on the Touchscreen man-machine interface. 6. Start the equipment, and the automatic deviation correction and tension control system starts to work, completing the continuous process of Spreader, Drying, Laminating (if necessary), and Winding. 7. After the work is completed, stop the machine through the emergency stop button or the normal program.
• The equipment should be used under the conditions of Ambient Temperature 10 ℃~ 40 ℃ and Humidity 30~ 90% RH. • Compressed air of 0.5 to 0.8 MPa is required as a gas source. • Pay attention to safety during operation, and the equipment is equipped with an emergency stop button for emergency use. • Spreader Film thickness adjustment is manual operation, which needs to be accurately adjusted according to the indicator. • The maximum roll diameter of discharge and receipt is 1000mm, and the roll bearing capacity does not exceed 50KG. The total power of the equipment is 40kW, and it is necessary to ensure that the power supply meets the requirements of 380V, 50Hz, three-phase five-wire system. • Large dimensions (about 14000mm*1450mm*1650mm), enough space should be reserved for installation.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
