Overview
Automatic Film Applicator is a device used for intermediate coating film in laboratory. It replaces manual film and automatically films to improve the accuracy and efficiency of film. The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate by controlling the Spreader head and Spreader parameters to form the desired film. This Film Applicator is Drawdown blade type Automatic film applicator, with heating and Vacuum chuck function, innovative bar Installation method and clamshell Drawdown blade head greatly improve Spreader efficiency, easy to clean, support speed control and application length adjustment, suitable for laboratory High Accuracy automatic film, Moulding proofing in laboratories such as university research institutes, New material, lithium, glue, Resin, etc.
Features
1. Surface hard treatment Aluminum alloy countertop, Hardness and wear resistance, Smoothness of countertop is detected by imported High Accuracy instrument
2. Big brand differential regulator, high film thickness control accuracy
3. With heating and Vacuum chuck function
4. Drawdown blade design, cleaning fast and convenient
5. Touchscreen control panel, easy to operate
6. Free adjustment of application length and Spreader speed
7. Servo motor, stable operation, higher film accuracy
Principle
The Working Principle of Automatic Film Applicator is to evenly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. This Film Applicator uses Blade Coating method, combined with Vacuum chuck to fix the substrate, to achieve stable operation through servo motor drive, and is equipped with heating function to increase the film mass.
Applications
Moulding proofing in research institutes of universities, New materials, lithium batteries, glues, Resin and other laboratories; coating, inks, paints, Stock, lithium batteries, Pressure sensitive adhesives, Resin, glues, polymer materials, pharmaceuticals and other film samples; film, release paper, aluminum foil copper foil, thin paper scraping
Steps
1. Prepare the substrate and place it on the Spreader stage
2. Vacuum chuck function fixed substrate
3. Set application length and Spreader speed parameters
4. Set the heating temperature as required
5. Start Film Applicator for Auto Spreader
6. Spreader complete the device and clean the Drawdown blade
Notice
• Ensure that the equipment power supply meets the requirements before use (220V/50HZ or customized voltage)
• Pay attention to the Spreader parameter settings during operation to avoid exceeding the equipment specifications
• After the Spreader is completed, clean the clamshell Drawdown blade in time to keep the equipment clean
• Pay attention to temperature control when using the heating function to avoid burns
• Regularly check whether the Vacuum chuck system is working properly
