Overview
JY-40B double barrel paint mixer is an efficient and practical paint mixing equipment, suitable for 0.5-5 liter barrels of paint, can mix 2 barrels of 5L paint at a time, suitable for barrel height 80MM-240MM. The equipment is easy to operate and has a low failure rate. The sand blasting die-casting splint has both beauty and Reliability. It is equipped with a timing switch that can be set freely. It adopts a swing vibration method in all directions to ensure that the paint is fully mixed and uniform.
Features
1. Easy and fast operation with low failure rate
2. Die-casting splints treated by sand blasting, beautiful appearance and reliable performance
3. Timing switch, mixing time can be set according to needs, generally 0-15 minutes, can be customized to 2 hours
4. Swing vibration in all directions to ensure full mixing
5. The clamping plates on both sides have circles of different sizes, which can be adapted to paints buckets of various diameters
Principle
Adopting the swing vibration mode in all directions, through the vibration Frequency of 550 times/minute, the paint is fully mixed in the barrel to ensure the mixing effect.
Applications
Paint mixing operation
Standards
Operating voltage 220V 50/60Hz
Steps
1. Place the paint barrel in the clamping plate circle
2. Set the timing switching time according to the mixed demand
3. Start the equipment for mixing operations
4. The device automatically stops after the timing ends
Notice
• Operating voltage 220V 50/60Hz
• The height of the mixing barrel should be within the range of 80MM-240MM
• The diameter of the paint barrel should match the specifications of the clamping plate circle
• Regularly check the operating status of the equipment
• Pay attention to safe operation when using
