Overview
The MUXUAN MXF-60L three-axis vacuum electric heating Stirrer is an efficient, multi-functional, mandatory mixing and mixing equipment specially designed for high viscosity materials. The kettle is equipped with three different forms of Stirrers, including a low-speed wall scraping Stirrer and two high-speed dispersers, which carry out intense shearing and mixing of materials through complex compound movements. The equipment adopts a special sealing structure, which supports vacuum operation to remove bubbles, and can realize electric heating or chilling down. The hydraulic lifting and lowering of the cylinder head and the mobile design of the cylinder block make the operation more convenient.
Features
Adopting a three-axis mixing structure, a low-speed wall scraper Stirrer and two high-speed dispersers work together to achieve efficient forced mixing.
2. Equipped with a unique sealing structure, it can be operated in a vacuum environment to effectively eliminate bubbles in the material.
3. The kettle body supports electric heating, steam heating, oil-water circulation heating and jacket coil cooling down, and the temperature control is flexible.
4. The low-speed frame Stirrer has a wall scraping function to ensure that the materials adhering to the wall and bottom of the kettle are fully scraped off and mixed.
5. Two sets of high-speed dispersers adopt frequency conversion speed regulation, which can flexibly adjust Rotation speed according to material viscosity and process requirements.
6. The inner wall of the kettle is finished by a large vertical car to ensure that the drawdown blade can completely scrape the inner wall material.
7. The cylinder head can be hydraulically lifted, the cylinder block can move freely, and can be equipped with a hydraulic extruder to facilitate the discharge of high-viscosity materials.
Principle
When the equipment is working, a low-speed Stirrer in the kettle rotates around the axis of the kettle body, driving the mountain-shaped wall scraper to scrape off the wall and bottom of the kettle. At the same time, the other two high-speed stirringdevices rotate at high speed around their own axis at different Rotation speeds. Under the combined motion of revolution and rotation, the material is subject to strong shearing, dispersion and mixing. Under the condition of vacuuming, air bubbles in the material can be further eliminated.
Applications
Adhesive, sealant, mold glue, silicone sealant, organic silicone, polyurethane sealant, anaerobic glue, sealing glue, ointment, Electrode Stock, lithium-ion battery slurry, gluing agent, pigment, inks, ointment paste material, grease, paints, paste cosmetics, additives and other high viscosity preparation, laboratory small batch trial production
Standards
No mention yet.
Steps
1. Position the movable material cylinder.
2. Raise the cylinder head through the hydraulic system.
3. Carry out feeding.
4. Lower cylinder head and ensure sealing.
5. Start the heating or chilling down system as needed.
6. Start low-speed wall scraping stirring and high-speed dispersion stirring, and choose the vacuum mode.
7. After mixing, stop stirring.
8. Raise the cylinder head and move the cylinder to the matching hydraulic extruder for discharge.
Notice
The equipment is designed for high-viscosity materials, and it is necessary to ensure that the material characteristics meet the requirements when using it.
• Check the sealing system before operation to ensure sealing during vacuum or pressure operation.
• According to the material viscosity and process requirements, the Rotation speed of the high-speed disperser is reasonably set through the frequency converter.
• Please pay attention to safety when moving the material cylinder and operating the hydraulic lifting system.
• The laboratory model is only suitable for small batch trial production.
