Overview
LINSHANG LS138 UV energy meter is a professional instrument that can simultaneously measure UV energy, UV intensity and temperature. It is suitable for UV energy, intensity and temperature detection of UV curing machine, UV dryer, mobile phone UV coating machine, exposure machine, printing press and other equipment. The instrument is suitable for measurement of high voltage mercury lamp, halogen lamp and other Illuminant UV intensity and energy.
Features
1. Simultaneous measurement of UVA, UVB, UVC, UVV four bands of UV Power and Energy.
2. True intelligent UV energy meter, large LCD directly displays temperature and intensity Linear dispersion.
3. USB interface, support computer software to read detailed record data, generate data Linear dispersion and print out test reports.
4. High Accuracy Rapid Response Temperature Detector, Dynamic measurement of the actual temperature in the curing machine.
5. High temperature resistant design, can run in 100 degrees Celsius environment for a long time.
6. The instrument has built-in large-capacity memory, which can record up to 60,000 power data and 3800 temperature data.
7. The stored data is not lost when powered off, and the last test data is automatically displayed when powered on.
8. Built-in Timer can accurately record the length of UV curing time.
Principle
The UV energy meter covers four bands of UVC, UVB, UVA and UVV through Light spectrum Response Linear dispersion, uses High Accuracy Sensor fast sampling (2048 times/second) to measure UV Power and energy, and integrates temperature detectors to dynamically monitor Ambient Temperature. Data is stored through built-in memory and interacts with computer software through USB interface to realize data recording, Linear dispersion generation and report output.
Applications
UV curing machine, UV dryer, mobile phone UV coating machine, exposure machine, printing press
Standards
JJG 879-2015 ultraviolet radiation luminometer verification specification, QBT 2826-2017 Offset Printing ultraviolet (UV) curing ink national standard
Steps
1. Install 2 AAA alkaline dry batteries for power supply.
2. After booting, the instrument automatically displays the last test data.
3. Place the instrument under the ultraviolet light source to be measured for measurement.
4. Connect to the computer through the USB interface, use the software to read data, generate Linear dispersion or print reports.
5. Built-in Timer automatically records UV curing time.
Notice
The instrument is suitable for the measurement of high voltage mercury lamps, halogen lamps and other Illuminants.
• High temperature resistant design allows long-term operation in a 100 degree Celsius environment.
• Storage data is not lost when powered off, but make sure the battery power is normal.
• Special computer software is required when using the USB interface.
• Light spectrum coverage from UVC to UVV for measurement.
