Overview
The DDKSIC PCD10 Portable Multi-Parameter Analyzer is an intelligent water quality analysis device with a 3.5-inch TFT LCD screen. It supports accurate measurement of pH, mV (optional ORP Electrode), conductivity, resistivity, TDS, salinity, dissolved oxygen concentration, dissolved oxygen Saturation, temperature and other parameters. The instrument is powered by a lithium battery, has a Type-C charging interface and IP57 dust and water resistance rating, which is suitable for rapid on-site inspection.
Features
1.3.5-Inch TFT LCD color screen, beautiful and clear, easy to operate.
2. New UI interface design, providing a navigational operation experience.
3. Support Multi-Parameter measurement of pH, ORP, conductivity, resistivity, TDS, salinity, dissolved oxygen concentration, dissolved oxygen Saturation, temperature, etc.
4. Intelligent Operating system, Integrated Electrode Management, Data Management, Parameter Setting and other functions.
5. Electrode constant calibration and solution calibration are supported for conductivity calibration.
6. Super data management capabilities, with a maximum storage capacity of 3000 sets of data.
7. Measurement mode of interval timing can be set.
8. Low battery display and data lock function.
9. Type-C charging interface, in line with European Union standards.
10. Lithium battery powered, supports low power management and power failure protection.
11. IP57 dustproof and waterproof rating.
12. Supporting PC-side Software supports operation behavior records, sample ID information, user classification management, equipment use management, Data analysis and other functions.
Principle
The instrument uses built-in Sensor and Electrode measurement of water quality parameters, such as pH Electrode detection of hydrogen ion concentration, conductivity Electrode measurement of solution conductivity, dissolved oxygen Sensor to detect oxygen content. Automatic temperature compensation and air pressure compensation technology are used to ensure measurement accuracy. The intelligent system processes and stores the data, and the user can manage and analyze it through the color screen interface or PC software.
Applications
Water quality monitoring, environment testing, laboratory analysis, industrial process control, aquaculture, wastewater treatment, drinking water security evaluation
Standards
European Union standards
Steps
1. Turn it on and check the battery level.
2. Measurement parameters (such as pH, conductivity, etc.).
3. Electrode calibrated as required (e.g. Automatic pH calibration or conductivity calibration).
4. Electrode immersion in the sample.
5. Read and record measurement data.
6. Use the data locking function to save the results.
7. Connect PC software through Type-C interface for data management.
Notice
• Make sure Electrode is clean and intact before use.
• Standard solutions should be used when calibrating.
• Avoid operating in extreme temperatures or Humidity environments.
• Regularly check the battery status to prevent insufficient power.
• Keep the instrument drying, dustproof and waterproof grade is IP57, but do not soak for a long time.
The supporting PC software needs to be installed and used correctly.
• Pay attention to the accurate input of sample ID information during measurement.
