Overview
CON201 Conductivity detector Electrode is a practical tool of DDKSIC brand focusing on conductivity measurement. It adopts a plastic shell with a 1-meter BNC cable, and the specification is φ 12mm × 120mm. The Electrode can accurately capture solution conductivity changes in the range of 0-200.0mS/cm. It does not need to refer to the design of the solution to simplify the operation process. It is suitable for online monitoring and laboratory analysis of tap water, sewage, chemical raw material liquid and other media. It can work stably in different environments and provide reliable conductivity data support for water quality management and industrial production process control.
Features
1. The plastic shell is equipped with a 1-meter BNC cable, and the specification is φ 12mm × 120mm.
2. Measurement range 0-200.0mS/cm, accurately capture the solution conductivity change
3. No need to refer to solution design, simplifying the operation process
4. Suitable for a variety of media, can work stably in different environments
Principle
The Conductivity detector Electrode reflects its Ion concentration by measuring the conductivity of the solution, and uses the Conductivity detector signal generated by the contact of Electrode with the solution to detect, and can achieve accurate measurement without referring to the solution.
Applications
Laboratory, outdoor routine water sample measurement, tap water, sewage, chemical raw material liquid
Steps
1. Electrode and measurement equipment
2. Electrode immersion in the solution to be tested
3. Read and record conductivity values
4. Clean Electrode After Use and Store Properly
Notice
• Electrode cleaning and drying before use
• Electrode should be completely immersed in solution during measurement
• Avoid Violent Impact or Drop of Electrode
• Clean and store properly after use
• Electrode status is checked regularly to ensure measurement accuracy
