Overview
CON201T Conductivity detector Electrode is a professional measurement tool launched by the DDKSIC brand, integrating temperature compensation and accurate measurement. It adopts a plastic shell with a 1-meter cable, built-in 10KΩ temperature sensor, Electrode interface is 4 cores, and the specification is φ 12mm × 120mm. It can accurately capture the change of solution conductivity in the range of 0-200.0mS/cm. It is suitable for online monitoring and laboratory analysis of tap water, sewage, chemical raw material liquid and other media.
Features
1. Built-in 10KΩ temperature sensor realizes temperature compensation function
2. Plastic shell with 1 meter cable design
3.4 Core Electrode Interface
4. Measurement range 0-200.0mS/cm
5. Simplify the operation process without reference solution
6. Suitable for multi-media measurement
Principle
CON201T Conductivity detector Electrode detects the temperature change of the solution through the built-in 10KΩ temperature sensor, and automatically performs temperature compensation to ensure the accuracy of conductivity measurement in different temperature environments. Electrode directly contacts the solution to be tested and accurately captures conductivity changes in the range of 0-200.0mS/cm.
Applications
Laboratory, outdoor routine water sample measurement, tap water, sewage, chemical raw material liquid
Steps
1. Electrode connection to measurement device
2. Electrode immersion in the solution to be tested
Step 3 Wait for the reading to stabilize
4. Record measurement results
Notice
• Electrode cleaning and drying before use
• Avoid Violent Impact on Electrode
• Electrode is fully immersed in the solution during measurement
• Regularly check Electrode status
• Electrode drying during storage
