Overview
TEMP-02H Temperature Electrode adopts stainless steel shell to ensure durability, equipped with 1 meter cable to meet daily measurement needs. Built-in 10KΩ temperature sensor Response is fast, Measurement range 0-110 ℃ is suitable for aqueous solution, industrial medium and other environments, 4-core interface can be stably connected with a variety of equipment, φ 5mm × 120mm compact design is suitable for plug-in installation, widely used in chemical reaction temperature monitoring, laboratory thermostatic control, water treatment equipment temperature measurement and other fields, High Accuracy and Stability to ensure Reliability of temperature measurement.
Features
1. Stainless steel housing guarantees durability
2.1M cable for daily measurement needs
3. Built-in 10KΩ temperature sensor Response fast
4. Measurement range 0-110 ℃ Widely applicable
5.4 core interface can be stably connected to a variety of devices
6.φ 5mm × 120mm compact design suitable for plug-in installation
7. High Accuracy and Stability Ensure Temperature Measurement Reliability
Principle
TEMP-02H Temperature Electrode has a built-in 10KΩ temperature sensor, which converts the temperature signal into an electrical signal by detecting the change of the resistance value of the Sensor caused by the change of the Ambient Temperature, and transmits it to the connected device for temperature measurement and monitoring through the 4-core interface.
Applications
Chemical reaction temperature monitoring, laboratory thermostatic control, water treatment equipment temperature measurement, conventional aqueous solution
Steps
1. Electrode Appearance nondestructive
2. Connect Electrode 4-core interface to measurement equipment correctly
3. Insert Electrode into the medium to be tested
4. Turn on the measurement device for temperature monitoring
5. Clean Electrode After Use and Store Properly
Notice
• Do not use beyond the 0-110 ° C Measurement range
• Avoid Violent Impact or Bending of Electrodes
• Regularly check that Electrode cables and interfaces are in good condition
• Pay attention to protection when using in corrosion environment
• Keep the drying environment clean when storing
