$ 599.00Ex works
Using high definition color display, the viewing distance is up to 10 Meters. With a variety of communication output methods, support remote paraMeter configuration and program upgrade. Explosion-proof level Exd II C T6, Protection Rating IP66, adapt to harsh environments.
Category : Gas Detector
Brand : Empaer
SKU : NB049510
Service :The delivery and service By NBCLab.Com
The Empaer APEG-D-O3 Volkswagen Series Fixed Ozone Detector is a cost-effective, high-performance on-site gas monitoring instrument, divided into general-purpose and special-purpose models. Its main function is to convert the detected ozone concentration into a standard signal and transmit it to the host computer. Built-in relays can control peripheral devices, and support remote monitoring and setting.
1. Settling 10 years of star products, with Internet of Things functions, Explosion-proof level Exd II C T6, EX TD A21, Protection Rating IP66. 2. Appearance design with independent intellectual property rights, high brand recognition. 3. High performance, with reference to a variety of industry standards, widely used and stable. 4. Ultra high definition color display, viewing distance ≥ 10 meters. 5. A variety of wired and wireless communication output methods, supporting NB-IoT, 4G, WIFI, etc. 6. Bilingual Operating system, supports Chinese and English switching. 7. Remote control function, allowing for parameter configuration and program upgrades. 8. Protection functions include intermittent detection and Sensor automatic protection (optional). 9. Black box function, record operation, alarm, over-temperature, over-range use. 10. Complete reminder and alarm functions, such as Sensor expiration, over-concentration, over-temperature, fault, calibration reminder. 11. Humanized operation guidelines to prevent misoperation. 12. Zero automatic correction function. 13. Operation mode: button and remote control. 14. Easy to install, support Wall-Mounted, ceiling type, pipeline type, etc. 15. Waterproof, dustproof, anti-static, anti-electromagnetic interference, special anti-cross gas interference.
The detector detects on-site ozone gas concentration by diffusion (default) or Miscellaneous Sampling method, converts it into standard signals (such as 4-20mA, RS-485, etc.), and transmits it to PLC, DCS, alarm control host and other host computers for display, management and control, to achieve intelligent Gas detection alarm.
Petroleum and petrochemical, gas, aerospace and military industry, chemical industry, electric power, scientific research institutes, municipal engineering, mining, metallurgy
Measurement equipment CPA, CCCF, Flameproof, Intrinsic Safety (IS), IP66 protection, Mine safety, Coal safety, ROSH, SIL2, CE, ATEX, IEC
1. Install the equipment, select Wall-Mounted, Ceiling or Pipeline Installation method. 2. Connect the power supply, the power supply mode is 12~ 36VDC (typical 24VDC) or optional battery power supply. 3. Select Sampling method, such as diffusion, flow, pipeline or pump suction (external). 4. Set the parameters by pressing the button or infrared remote control, and follow the operation instructions. Connect signal output, such as wired (4-20mA, RS-485, etc.) or wireless (WIFI, LORA, GPRS/4G/NB-IoT). 6. Configure alarm values and remote parameters (e.g. via NB-IoT, 4G, or WiFi). 7. Regular calibration, the recommended period is 1 year, and remote calibration is supported.
• Working ambient temperature range is -40~ 55 ℃, storage temperature is -10~ 30 ℃, avoid using beyond the range. • Operating Pressure is 86-106KPA to ensure operation at specified pressure. • Environmental humidity of 10% -95% RH, no condensation, to prevent Humidity from affecting performance. • Pay attention to Protection Rating IP66 during installation to ensure waterproof and dustproof. • Check the status of the Sensor before use to avoid over-range or over-temperature operation to prevent damage. • When remote control, ensure that the network connection is stable to prevent parameter configuration failure. The calibration period is recommended to be 1 year, and it should be carried out in time to maintain accuracy. • Follow humanized guidelines during operation to prevent malfunctions caused by misoperation. • Optional features such as Sensor Automatic Protection need to be configured according to requirements. • In the electromagnetic interference environment, pay attention to the anti-interference performance to ensure accurate detection.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
