Overview
MA101 Moisture Analyzer is a High Accuracy moisture content detection equipment. It adopts a new generation of electromagnetic force Sensor and PT100 High Accuracy temperature transducer. It is equipped with a 5-inch LCD full high definition color Touchscreen and supports Chinese and English and other multi-language display switching. The instrument has multiple heating modes such as automatic, manual, preheating, preset and custom. The test temperature range is 50~ 200 ° C. The heating time is adjustable from 0 to 99 minutes. It can display the moisture content/drying allowance 0-100.00% in real time. It also supports dynamic Linear dispersion display and multiple sets of drying process memory.
Features
1. New Generation High Accuracy Electromagnetic Force Sensor
2.5-Inch LCD full high definition color Touchscreen, support Chinese and English and other multi-language display switching
3. Front horizontal bubble and adjustable foot, easy to operate
4. PT100 High Accuracy temperature transducer and temperature control protection system
5. Heating mode includes automatic, manual, preheating, preset, custom adjustable
6. The test temperature is adjustable from 50 to 200 ° C
7. The heating time is adjustable from 0 to 99 minutes, with an interval of 1 minute
8. Moisture content/drying allowance 0-100.00% display, supports real-time dynamic Linear dispersion and multi-group drying process memory
9. RS232 data interface, which can connect printers and PCs
10. Optional a variety of accessories such as portable cases, printers, shredders, etc
Principle
Moisture Analyzer through High Accuracy Electromagnetic Force Sensor measurement of sample weight change, combined with PT100 temperature transducer to precisely control the heating temperature, heating the sample at the set temperature and time, so that water evaporation, by weight difference calculation of water content and drying margin, and real-time display Dynamic Linear dispersion.
Applications
Moisture content detection, drying process monitoring, quality control, laboratory analysis
Steps
1. Place the instrument and adjust the horizontal foot to center the horizontal bubble
2. Turn on the power and select the language and heating mode
3. Set the test temperature and heating time
4. Place the sample and start the test
5. Linear dispersion and data observed in real time
6. View or print the report after the test is completed
Notice
• Make sure the instrument is placed horizontally before use
Avoid use in humid or vibrating environments
• Do not touch the heating parts when heating to prevent burns
• Regularly clean pans and Sensors
• Power frequency 110v-240v 50HZ/60HZ
• Optional accessories need to be connected and used correctly
