Overview
DC-0515N Low Temperature Circulating Bath is a device of Shangtian Jingyi brand. Temperature range is -5~ 100 ℃, temperature resolution is 0.1 ℃, Tank size is 300 * 250 * 210mm, volume is 15L, pump flow is 10L/min, Tank opening dimensions are 235 * 160mm.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, clear working status information display
3. Equipment instrumentation with temperature calibration and self-tuning functions
4. Control part adopts ABS mold design, Overall Appearance streamline design
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner made of stainless steel 304, easy to clean and durable
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. The motor impeller is fully enclosed to prevent potential safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain are all made of stainless steel 304 pagoda joints, and the drain valve is designed with built-in hidden type
11. Standard circulating silicone tube + thermal insulation sleeve, easy for customers to use flexibly
Principle
The Low Temperature Circulating Bath achieves precise temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal cycle pump to ensure uniform and stable temperature in the tank. The equipment and instruments automatically adjust the parameters through temperature calibration and self-tuning functions to maintain the set temperature.
Applications
Laboratory, scientific research, industry, medical care, education
Standards
Environmental standards, safety standards
Steps
1. Connect the power supply and turn on the device.
2. Set the desired temperature through the large-screen backlit LCD display
3. Start the refrigeration system and circulating pump
4. Monitor working status information to ensure stable temperature
5. Turn off the device and disconnect the power after use
Notice
• Ensure equipment is placed in a smoothly ventilated environment
• Regularly clean stainless steel platens and liners to maintain hygiene
• Check whether the connection between the circulation interface and the drain port is firm
• Avoid operating equipment under overheating or overcurrent conditions
• Pay attention to safety when removing the side panels to prevent damage to the internal components
