Overview
DC-3010N Low Temperature Circulating Bath is a precision temperature control device of Shangtian Jingyi brand. Temperature range is -30~ 100 ℃, temperature resolution is 0.1 ℃, Tank size is 270 * 200 * 200mm, and volume is 10L. It is suitable for precise temperature control in laboratory and industrial environments.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system, equipped with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, working status information is clearly visible
3. Equipment instrumentation with temperature calibration and self-tuning functions
4. The control part adopts ABS mold design, the overall Appearance is streamlined
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner are made of stainless steel 304, easy to clean and durable
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. Motor impeller is fully enclosed to prevent safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain are all stainless steel 304 pagoda joints, and the drain valve is built-in hidden type
11. Standard circulating silicone tube and thermal insulation sleeve, easy to use flexibly
Principle
The Low Temperature Circulating Bath achieves temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal circulation pump to ensure uniform and stable liquid temperature in the Tank, and the meter precisely adjusts the temperature through temperature calibration and self-tuning functions.
Applications
Laboratory and industrial environment
Steps
1. Connect the power supply and turn on the device.
2. Set the desired temperature through the large-screen LCD display
3. Stir cycle motor and refrigeration system
4. Monitor working status information to ensure stable temperature
5. Turn off the equipment and clean the board and liner after use
Notice
• Make sure the power supply is connected correctly before use to avoid overcurrent
• Regularly check whether the refrigeration system and protective devices are normal
• Use a soft cloth to wipe the stainless steel surface when cleaning to avoid scratches
• Pay attention to the closed state of the motor impeller during operation to prevent safety hazards
• Be careful when removing the side panels to avoid damage to the internal structure
• Use the built-in hidden drain valve when draining to ensure safe operation
