Overview
The DC-5015N Low Temperature Circulating Bath is a thermostatic device with a Temperature range of -50~ 100 ° C, a Tank volume of 15L, a large-screen backlit LCD display, and a streamlined overall Appearance design, suitable for precise temperature control scenarios.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, clear working status information display
3. Equipment instrumentation with temperature calibration and self-tuning functions
4. Control part adopts ABS mold design, Overall Appearance streamline design
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner are made of stainless steel 304 for easy cleaning and durability
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. The motor impeller is fully enclosed to prevent potential safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain are all made of stainless steel 304 pagoda joints, and the drain valve is designed with built-in hidden type
11. Standard circulating silicone tube + thermal insulation sleeve, easy for customers to use flexibly
Principle
The Low Temperature Circulating Bath achieves temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal cycle pump, to ensure uniform and stable temperature in the Tank. The equipment and meters precisely adjust the temperature to the set range through temperature calibration and self-tuning functions.
Applications
Laboratory, scientific research, industry, medical care, education
Standards
Environmental standards, safety standards
Steps
1. Connect the power supply and turn on the device.
2. Set the desired temperature through the large-screen LCD display
3. Start the refrigeration system and circulating pump
4. Monitor working status information to ensure stable temperature
5. Turn off the device and disconnect the power after use
Notice
• Check whether the power supply and connection are safe before use
Avoid operating in humid or flammable environments
• Regularly clean stainless steel platens and liners
• Ensure that the circulation interface and drain are not blocked
• Follow the guidance of equipment and instrumentation self-tuning function
• Pay attention to prevent damage to the internal components when removing the side panels
