Overview
The DHC-0510N High and Low Temperature Circulating Bath is a thermostatic device with a Temperature range of -5 to 160 ° C, with a 10L Tank volume and a 270 * 200 * 200mm Tank size, suitable for precise temperature control scenarios.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, clear working status information display
3. Equipment instrumentation with temperature calibration and self-tuning functions
4. Control part adopts ABS mold design, Overall Appearance streamline design
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner made of stainless steel 304, easy to clean and durable
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. The motor impeller is fully enclosed to prevent potential safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain are all made of stainless steel 304 pagoda joints, and the drain valve is designed with built-in hidden type
11. Standard circulating silicone tube + thermal insulation sleeve, easy for customers to use flexibly
Principle
The High and Low Temperature Circulating Bath achieves temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal cycle pump to ensure uniform and stable temperature in the Tank. The equipment and meters precisely adjust the temperature through temperature calibration and self-tuning functions.
Applications
Laboratory, scientific research, industrial testing
Standards
Environmental protection Compressor refrigeration standard
Steps
1. Connect the power supply and turn on the device.
2. Set the desired temperature through the large-screen LCD display
3. Start circulating pump and Stir motor
4. Monitor temperature status and proofread if necessary
5. Turn off the equipment and clean the platen and liner after use
Notice
• Ensure equipment is used in a well-ventilated environment
• Regularly check overheating and overcurrent protection devices
• Use a soft cloth when cleaning to avoid scratching the stainless steel surface
• Pay attention to safety when disassembling the side panel to prevent electric shock
• Make sure the connection is firm when using circulating silicone tubes and insulation sleeves
