Overview
The DHC-0520N High and Low Temperature Circulating Bath is a thermostatic device with a Temperature range of -5 to 160 ° C and a Tank Volume of 20L, suitable for temperature control applications in laboratory and industrial environments.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system, equipped with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, clear working status information
3. Equipment instrumentation with temperature calibration and self-tuning functions
4. The control part adopts ABS mold design, the overall Appearance is streamlined
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner made of stainless steel 304, easy to clean and durable
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. Motor impeller is fully enclosed to prevent safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain port are made of stainless steel 304 pagoda joints, and the drain valve is built-in hidden
11. Standard circulating silicone tube and insulation sleeve for flexible use
Principle
The equipment realizes temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal circulation pump to ensure uniform and stable temperature in the Tank. The instrument system has a self-tuning function, which automatically adjusts the parameters to maintain the set temperature.
Applications
Laboratory and industrial environment
Steps
1. Connect the power supply and turn on the device.
2. Set the desired temperature through the large screen LCD
3. Start circulating pump and Stir system
4. Monitor the temperature display, and the device automatically adjusts to the set value
5. Turn off the device and disconnect the power after use
Notice
• Make sure the equipment is placed in a smoothly ventilated place
• Regularly clean stainless steel platens and liners
• Check whether the circulation interface and drain are normal
• Avoid prolonged operation under overheating or overcurrent conditions
• Pay attention to safety when removing the side panels to prevent damage to the internal components
