Overview
The DC-0506N (0.01) Low Temperature Circulating Bath is a high-performance thermostatic device with a Tank volume of 6L, a Temperature range of -5~ 100 ° C, and a temperature resolution of 0.01 ° C, suitable for precise temperature control scenarios.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system, equipped with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, clear working status information
3. Equipment instrumentation with temperature calibration and self-tuning functions
4. The control part adopts ABS mold design, the overall Appearance is streamlined
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner are made of stainless steel 304 for easy cleaning and durability
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. Motor impeller is fully enclosed to prevent safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain are all stainless steel 304 pagoda joints, and the drain valve has a built-in hidden type
11. Standard circulating silicone tube + thermal insulation sleeve, easy for customers to use flexibly
Principle
The Low Temperature Circulating Bath achieves temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal cycle pump, to ensure uniform and stable temperature in the tank. The equipment instrumentation precisely adjusts the temperature through temperature calibration and self-tuning functions to maintain the set range.
Applications
Laboratory, scientific research, industry, medical care, education
Steps
1. Connect the power supply and turn on the device.
2. Set the required temperature parameters
3. Start the refrigeration and circulation system
4. Monitor the working status of the backlit LCD display
5. Turn off the device and disconnect the power after use
Notice
• Make sure the equipment is placed in a smoothly ventilated place
• Regularly clean stainless steel platens and liners
• Avoid prolonged operation under overheating or overcurrent conditions
• Pay attention to safe operation when disassembling the side panel
• Check the connection firmness when using standard circulating silicone tubes and insulation sleeves
