Overview
The DC-0515N (0.01) Low Temperature Circulating Bath is a high-performance thermostatic device with a Tank volume of 15L, a Temperature range of -5~ 100 ° C, and a temperature resolution of 0.01 ° C, suitable for precise temperature control scenarios.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system, equipped with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, working status information is clearly visible
3. Equipment and instrumentation with temperature calibration and self-tuning functions
4. The control part adopts ABS mold design, the overall Appearance is streamlined
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner are made of stainless steel 304, easy to clean and durable
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. Motor impeller is fully enclosed to prevent safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain port are made of stainless steel 304 pagoda joints, and the drain valve is built-in hidden
11. Standard circulating silicone tube and thermal insulation sleeve, easy for customers to use flexibly
Principle
The Low Temperature Circulating Bath achieves temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal cycle pump, to ensure uniform and stable temperature in the Tank. The equipment and meters precisely adjust the temperature through temperature calibration and self-tuning functions.
Applications
Laboratory, scientific research, industry, medical care, education
Steps
1. Connect the power supply and turn on the device.
2. Set the required temperature parameters
3. Start the refrigeration and circulation system
4. Monitor the working status information display
5. Turn off the device and disconnect the power after use
Notice
• Make sure the equipment is placed in a smoothly ventilated place
• Regularly clean stainless steel platens and liners
• Avoid overload use, pay attention to overheating and overcurrent protection
• Be careful when disassembling the side panel
• Pay attention to the strong connection when using the standard silicone tube and thermal insulation sleeve
