Overview
The DC-0520N (0.01) Low Temperature Circulating Bath is a High Accuracy temperature control device with a Tank volume of 20L, a Temperature range of -5~ 100 ° C, and a temperature resolution of 0.01 ° C. It is suitable for precise temperature control in laboratory and industrial environments.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system, equipped with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, working status information is clearly visible
3. Equipment instrumentation with temperature calibration and self-tuning functions
4. The control part adopts ABS mold design, the overall Appearance is streamlined
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner are made of stainless steel 304 for easy cleaning and durability
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. Motor impeller is fully enclosed to prevent safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain are all made of stainless steel 304 pagoda joints, and the drain valve is designed with built-in hidden type
11. Standard circulating silicone tube + thermal insulation sleeve, easy for customers to use flexibly
Principle
The Low Temperature Circulating Bath achieves temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, coupled with a high-performance Stir cycle motor and a heat-free centrifugal cycle pump, to ensure uniform and stable temperature in the Tank. The equipment and instruments precisely maintain the set temperature through temperature calibration and self-tuning functions.
Applications
Laboratory and industrial environment
Steps
1. Connect the power supply and turn on the device.
2. Set the required temperature parameters through the large-screen backlit LCD display
3. Start the refrigeration system and circulating pump
4. Monitor working status information to ensure normal operation
5. Turn off the device and disconnect the power after use
Notice
• Make sure the equipment is well grounded before use
• Regularly clean stainless steel platens and liners to maintain hygiene
• Pay attention to the fully enclosed design of the motor impeller during operation to avoid unauthorized disassembly
• Do not block the ventilating port when the equipment is running
• Use built-in hidden drain valve when draining
• Be careful when disassembling and assembling the side panels flexibly
