Overview
The DC-2006N (0.01) Low Temperature Circulating Bath is a precision temperature control device from the Shangtian Jingyi brand. The Tank volume is 6L, the Temperature range covers -20 ° C to 100 ° C, and the temperature resolution is up to 0.01 ° C. It is suitable for precise temperature control needs in laboratory and industrial environments.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system, equipped with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, working status information is clear and easy to read
3. Equipment instrumentation with temperature calibration and self-tuning functions
4. The control part adopts ABS mold design, the overall Appearance is streamlined
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner are made of stainless steel 304 for easy cleaning and durability
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. Motor impeller is fully enclosed to prevent safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain are all made of stainless steel 304 pagoda joints, and the drain valve is designed with built-in hidden type
11. Standard circulating silicone tube and thermal insulation sleeve, which is convenient for customers to use flexibly
Principle
The Low Temperature Circulating Bath achieves temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal cycle pump, to ensure uniform and stable temperature in the Tank. The equipment and meters precisely adjust the temperature to the set range through temperature calibration and self-tuning functions.
Applications
Laboratory and industrial environment
Steps
1. Connect the power supply and turn on the device.
2. Set the required temperature parameters through the large screen backlit LCD
3. Start the refrigeration and circulation system and monitor the working status display
4. Turn off the device and disconnect the power after use
Notice
• Ensure equipment is placed in a smoothly ventilated environment
• Regularly clean stainless steel platens and liners to maintain hygiene
• Pay attention to the fully enclosed design of the motor impeller during operation to avoid unauthorized disassembly
• Check whether the connection is firm when using the standard circulating silicone tube and insulation sleeve
• The side panel of the equipment can be disassembled, but non-professionals should not operate it at will
