Overview
The DC-2015N (0.01) Low Temperature Circulating Bath is a high-performance thermostatic device with a Tank volume of 15L, a Temperature range of -20~ 100 ° C, and a temperature resolution of 0.01 ° C. It is suitable for precise temperature control scenarios.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system, equipped with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, working status information is clearly visible
3. Equipment and instrumentation with temperature calibration and self-tuning functions
4. The control part adopts ABS mold design, the overall Appearance is streamlined
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner are made of stainless steel 304, easy to clean and durable
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. Motor impeller is fully enclosed to prevent safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain port are made of stainless steel 304 pagoda joints, and the drain valve is built-in hidden
11. Standard circulating silicone tube and thermal insulation sleeve, easy for customers to use flexibly
Principle
The Low Temperature Circulating Bath achieves precise temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal cycle pump to ensure uniform and stable temperature in the tank. The equipment and instruments automatically adjust the parameters through temperature calibration and self-tuning functions to maintain the set temperature.
Applications
Laboratory, scientific research, industry, medical care, education
Steps
1. Connect the power supply and turn on the device.
2. Set the required temperature parameters through the large screen LCD
3. Start the refrigeration and circulation system
4. Monitor working status information to ensure stable temperature
5. Turn off the equipment and clean the platen and liner after use
Notice
• Power frequency meets equipment requirements
• Regularly check whether the refrigeration system and protective devices are normal
• Use a soft cloth when cleaning to avoid scratching the stainless steel surface
• Pay attention to safety when removing the side panels to prevent damage to the internal components
• Make sure the connection is firm when using circulating silicone tubes and insulation sleeves
