Overview
DC-2030N (0.01) Low Temperature Circulating Bath is a precision temperature control device of Shangtian Jingyi brand. The Tank volume is 30L, the Temperature range covers -20 ° C to 100 ° C, and the temperature resolution reaches 0.01 ° C. It is suitable for thermostatic needs in laboratory and industrial environments.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system, equipped with multiple overheating and overcurrent protection devices.
2. Large screen backlit LCD display, the working status information is clearly visible.
3. Equipment and meters are equipped with temperature calibration and self-tuning functions.
4. The control part adopts ABS mold design, and the overall Appearance is streamlined.
5. High-performance Stir cycle motor, using non-heat centrifugal circulation pump.
6. The platen and liner are made of stainless steel 304, which is easy to clean and durable.
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship.
8. The motor impeller is fully enclosed to prevent potential safety hazards.
9. The side panels around the equipment can be disassembled and assembled flexibly.
10. The circulation interface and drain port are made of stainless steel 304 pagoda joints, and the drain valve is built-in hidden.
11. Standard circulating silicone tube and insulation sleeve, easy for customers to use flexibly.
Principle
The Low Temperature Circulating Bath achieves precise temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal cycle pump, to ensure uniform and stable temperature in the Tank. The equipment and instruments automatically adjust the parameters through temperature calibration and self-tuning functions to maintain the set temperature.
Applications
Laboratory and industrial environment
Steps
1. Connect the power supply and turn on the device.
2. Set the required temperature parameters through the large screen backlit LCD.
3. Start the refrigeration system and circulating pump, and the equipment automatically performs temperature calibration and self-adjustment.
4. Monitor operating status information to ensure temperature stability.
5. Turn off the device and disconnect the power after use.
Notice
• Check whether the power connection is safe before operation.
• Regularly clean stainless steel platens and liners to maintain hygiene.
• Avoid use under overheating or overcurrent conditions, and pay attention to the state of the protective device.
• Be careful when removing the side panels to prevent damage to the internal components.
• Make sure the connection is firm when using circulating silicone tubes and insulation sleeves.
