Overview
The DC-4006N (0.01) Low Temperature Circulating Bath is a high-performance temperature control device with a Tank volume of 6L, a Temperature range of -40~ 100 ° C, and a temperature resolution of 0.01 ° C, suitable for precise temperature control needs. The device is made of stainless steel 304 material, with a compact design. Tank opening dimensions are 180 * 140mm and Tank size is 270 * 200 * 130mm, which is easy to operate and maintain.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system, equipped with multiple overheating and overcurrent protection devices.
2. Large screen backlit LCD display, the working status information is clearly visible.
3. Equipment and meters have temperature calibration and self-tuning functions.
4. The control part adopts ABS mold design, and the overall Appearance is streamlined.
5. High-performance Stir circulation motor, using non-heat centrifugal circulation pump, pump flow rate 10L/min.
6. The platen and liner are made of stainless steel 304, which is easy to clean and durable.
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship.
8. The motor impeller is fully enclosed to prevent potential safety hazards.
9. The side panels around the equipment can be disassembled and assembled flexibly.
10. The circulation interface and drain port are made of stainless steel 304 pagoda joints, and the drain valve has a built-in hidden type.
11. Standard circulating silicone tube plus thermal insulation sleeve, which is convenient for customers to use flexibly.
Principle
The Low Temperature Circulating Bath achieves temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal cycle pump to ensure uniform and stable temperature in the tank. The equipment and instruments precisely adjust the temperature to the set value through temperature correction and self-tuning functions, and multiple protection devices ensure safe operation.
Steps
1. Connect the power supply and turn on the device.
2. Set the desired temperature through the large-screen backlit LCD display.
3. Start the refrigeration system and circulating pump to monitor the working status.
4. After use, turn off the device and disconnect the power.
Notice
• Make sure the equipment is well grounded before operation to avoid electrical risks.
• Regularly clean stainless steel surfaces to maintain equipment hygiene.
• Avoid use in extreme environments to avoid affecting performance.
• Pay attention to safety when removing the side panel to prevent accidental damage.
• When using the standard silicone tube and insulation sleeve, check whether the connection is firm.
