Overview
The DC-5015N (0.01) Low Temperature Circulating Bath is a high-performance thermostatic device with a Tank volume of 15L, a Temperature range of -50~ 100 ° C, and a temperature resolution of 0.01 ° C, suitable for precise temperature control scenarios.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, clear working status information display
3. Equipment instrumentation with temperature calibration and self-tuning functions
4. Control part adopts ABS mold design, Overall Appearance streamline design
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner are made of stainless steel 304 for easy cleaning and durability
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. The motor impeller is fully enclosed to prevent potential safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain are all made of stainless steel 304 pagoda joints, and the drain valve is designed with built-in hidden type
11. Standard circulating silicone tube + thermal insulation sleeve, easy for customers to use flexibly
Principle
The Low Temperature Circulating Bath achieves temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal cycle pump, to ensure uniform and stable temperature in the Tank. The equipment and meters precisely adjust the temperature through temperature calibration and self-tuning functions.
Applications
Laboratory, scientific research, industry
Standards
Environmental standards, safety standards
Steps
1. Connect the power supply and turn on the device.
2. Set the required temperature parameters
3. Start the refrigeration and circulation system
4. Monitor the working status information display
5. Turn off the equipment and drain it after use
Notice
• Make sure the equipment is placed in a smoothly ventilated place
• Regularly clean stainless steel platens and liners
• Avoid operating under overheating or overcurrent conditions
• Pay attention to safety when disassembling the side panel
• Use standard circulating silicone tubing and insulation jacket to optimize performance
