Overview
The DHC-1015N (0.01) High and Low Temperature Circulating Bath is a thermostatic device with a Temperature range of -10~ 160 ° C and a temperature resolution of 0.01 ° C. The Tank volume is 15L, which is suitable for precise temperature control scenarios.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, clear working status information
3. Equipment instrumentation with temperature calibration and self-tuning functions
4. The control part adopts ABS mold design, the overall Appearance is streamlined
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner are made of stainless steel 304 for easy cleaning and durability
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. Motor impeller is fully enclosed to prevent safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain port are made of stainless steel 304 pagoda joints, and the drain valve is built-in hidden
11. Standard circulating silicone tube and insulation sleeve for flexible use
Principle
The equipment achieves temperature control through a fully enclosed and environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal circulation pump to ensure uniform and stable temperature in the tank, and accurate temperature calibration and self-tuning are carried out through instrumentation.
Applications
Laboratory, research, industry, education
Steps
1. Connect the power supply and turn on the device.
2. Set the required temperature parameters
3. Start the refrigeration and circulation system
4. Monitor the working status information display
5. Turn off the equipment after use and drain it for cleaning
Notice
• Ensure that the power supply meets the equipment requirements
• Regularly check the refrigeration system and protective devices
• Use appropriate tools when cleaning to avoid damage to the stainless steel surface
• Pay attention to safety during operation and avoid contact with high or low temperature parts
• Use standard interface and insulation sleeve when draining
