Overview
The DHC-1020N (0.01) High and Low Temperature Circulating Bath is a precision temperature control device with a Tank volume of 20L, Temperature range covering -10~ 160 ° C, and temperature resolution of 0.01 ° C. It is suitable for temperature control needs in laboratory and industrial environments.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system, equipped with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, working status information is clearly visible
3. Equipment instrumentation with temperature calibration and self-tuning functions
4. The control part adopts ABS mold design, the overall Appearance is streamlined
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner are made of stainless steel 304, easy to clean and durable
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. Motor impeller is fully enclosed to prevent safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain port are made of stainless steel 304 pagoda joints, and the drain valve is built-in hidden
11. Standard circulating silicone tube and thermal insulation sleeve, easy for customers to use flexibly
Principle
The High and Low Temperature Circulating Bath achieves temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal cycle pump to ensure uniform and stable temperature in the Tank. The equipment and instruments precisely adjust the temperature through temperature calibration and self-tuning functions to meet the needs of different applications.
Applications
Laboratory and industrial environment
Steps
1. Connect the power supply and turn on the device.
2. Set the required temperature parameters
3. Start the circulating pump and refrigeration system
4. Monitor the working status information display
5. Turn off the equipment and clean the platen and liner after use
Notice
• Make sure that the side panels around the equipment are firmly installed to avoid accidental disassembly
• Regularly check the circulation interface and drain to prevent leakage
• Pay attention to connection safety when using standard circulating silicone tubes and insulation sleeves
• Avoid running the equipment for long periods of time under overheating or overcurrent conditions
• Use appropriate tools when cleaning to keep the stainless steel surface smooth
