Overview
Shangtian Jingyi DHC-2010N (0.01) High Low Temperature Circulating Bath is a high-performance temperature control device, Tank volume 10L, Temperature range -20~ 160 ℃, Temperature resolution 0.01 ℃, suitable for precise temperature control scenarios.
Features
1. Adopt a fully enclosed environmentally friendly Compressor refrigeration system with multiple overheating and overcurrent protection devices
2. Large screen backlit LCD display, clear working status information display
3. Equipment instrumentation with temperature calibration and self-tuning functions
4. Control part adopts ABS mold design, Overall Appearance streamline design
5. High-performance Stirring cycle motor, using non-heat centrifugal circulation pump
6. Plate and liner are made of stainless steel 304 for easy cleaning and durability
7. Refrigeration coil increases positioning and surface preparation process, fine workmanship
8. The motor impeller is fully enclosed to prevent potential safety hazards
9. The side panels around the equipment can be flexibly disassembled and assembled
10. The circulation interface and drain are all made of stainless steel 304 pagoda joints, and the drain valve is designed with built-in hidden type
11. Standard circulating silicone tube and thermal insulation sleeve, easy for customers to use flexibly
Principle
The High and Low Temperature Circulating Bath achieves temperature control through a fully enclosed environmentally friendly Compressor refrigeration system, combined with a high-performance Stir cycle motor and a heat-free centrifugal cycle pump to ensure uniform and stable temperature in the tank. The instrument has a self-tuning function to optimize temperature control accuracy.
Applications
Laboratory, scientific research, industrial testing
Steps
1. Connect the power supply and turn on the device.
2. Set the required temperature parameters
3. Start circulation pump and Stir function
4. Start using after the monitoring temperature is stable
5. Turn off the equipment and drain it after use
Notice
• Make sure the equipment is placed in a smoothly ventilated place
• Regularly check the refrigeration system and electrical connections
• Use a soft cloth when cleaning to avoid scratching the stainless steel surface
• Pay attention to prevent burns when draining
• Non-professionals should not disassemble the side panel
