Overview
DVP-36 high-speed Vacuumpump is a high-speed Vacuumpump of Yonghao Vacuum brand. It is designed for less parts, high reliability, silence and Ultimate vacuum degree stability. It adopts the world's advanced integral pump structure, forced oil pump lubrication control system, all-round exhaust system and special air ballast valve to ensure good reliability under different operating conditions.
Features
1. Ultimate vacuum degree
2. With a unique exhaust device
3. Design a special gas ballast valve to accelerate the extraction of steam without polluting the oil quality
4. Perfect built-in air inlet check valve system to protect the vacuum system from oil contamination when it stops working
5. Constant pressure oil circulation oil supply system protection
6. Small number of parts, easy to repair and maintain
7. Extremely low noise
Principle
The DVP-36 high-speed direct-coupled rotary vane Vacuumpump achieves efficient air extraction through a monolithic pump body structure, a forced oil pump lubrication control system and an omni-directional exhaust system. The special gas ballast valve is designed to accelerate steam extraction, prevent oil pollution, and ensure stable performance under different operating conditions.
Applications
Chemical, freezing, drying, Encasement, adsorption, coating, photovoltaic supporting, semiconductor, electronics, food hygiene, printing, Pottery and porcelain supporting, scientific research, Universities & colleges laboratories, laboratories, refrigerator assembly lines, air conditioners, water dispenser automatic control lines, lighting, Vacuum oven, freeze dryer, double row tube, tube furnace, glove box, Rotary evaporator, centrifugal condenser, cleaning machine, various high vacuum front pump, suctionfiltration, coating, sputtering equipment
Steps
1. Power frequency compliance with 220/380V requirements
2. Connect the air inlet interface KF-25/40 and the air outlet interface KF-25
3. Add pump oil to 2.2L oil capacity
4. Start the motor, monitor the speed and pumping rate
5. Open or close the gas ballast valve as required
6. Monitor the noise value and pump oil temperature rise during operation to ensure that the specified value is not exceeded
7. After stopping work, use the built-in air inlet check valve system to protect the vacuum system
Notice
• Power frequency is correct to avoid motor damage
• Regularly check the pump oil volume and oil quality to prevent pollution
• Monitor the pump oil temperature rise during operation and must not exceed 45 ° C
• Keep the air inlet and air outlet connected and sealed to prevent leakage
• Use check valves to protect the system from oil contamination when it stops working
• Follow maintenance cycle to reduce parts abrasion
