Overview
CHENCHI WDK-05 paper Tensile Strength Tester is a test equipment designed for universities and scientific research institutes. The host and auxiliary equipment integrate advanced technology, beautiful appearance, convenient operation, stable and reliable performance. Wide range of adaptation, complete functions, can detect paper tension resistance, Tensile Strength, elongation, elongation, fracture length, Tensile Energy Absorption, tensile index, Tensile Energy Absorption index, fracture time and other parameters, with no pollution, low noise, high efficiency and wide speed range.
Features
1. Various ranges are available (500N, 1000N, 2000N, 3000N), suitable for all paper and Cardboard
2. Five-inch color LCD Touchscreen operation, friendly interface
3. High accuracy, Precision test force is better than the indication +/- 1%
4. Stepless speed regulation, range 1mm/min to 500mm/min
5. Multiple protection functions: overload protection, leakage protection, limit protection
6. Test Travel and stretch space can be customized (standard 800mm)
7. Adopt stepper motor and synchronous belt drive for smooth operation
8. Can measure a variety of mechanical properties parameters, comprehensive functions
Principle
Through the CHENCHI controller, the system controls the servo motor to rotate through the speed control system, and after deceleration by the deceleration system, the tensile mechanical properties of the sample are completed by the rise and fall of the precision screw pair with the beam.
Standards
GB 8808、GB/T 1040.1、GB/T 1040.2、GB/T 1040.3、GB/T 1040.4、GB/T 1040.5、GB/T 4850、GB/T 12914、GB/T 17200、GB/T 16578.1、GB/T 7122、GB/T 2790、GB/T 2791、GB/T 2792、GB/T 17590、ASTM E4、ASTM D882、ASTM D1938、ASTM D3330、ASTM F88、ASTM F904、JIS P8113、QB/T 2358、QB/T 1130
Steps
1. Turn on the 220V 50Hz power supply and turn on the device
2. Set test parameters through five-inch color LCD Touchscreen
3. Install the specimen in the stretch space
4. Select the appropriate range and speed to start the test
5. Monitor the real-time display of test force, displacement, peak value and other data
6. After the test is completed, record the data and turn off the equipment
Notice
• Check whether the Power supply voltage meets the 220V requirement before use
• Make sure the equipment is well grounded to prevent leakage
• Do not touch moving parts during the test
• Regularly check whether the limit protection function is normal
• Avoid overloading to prevent damage to the Sensor
• Keep the equipment clean and maintain the transmission system regularly
